Skip to content
wikiLED
0.9375 mm pitchIndoorIMD

AOTO CVES0.9 specs

CV MINI Series is characterized with smaller LED chip, more stable screen robustness and better sealing & optical design. Multiple packaging can be selected for better satisfying different application scenarios.

Pitch
Size
600×338 mm
Nits
550 nits600 nits
AOTO CVES0.9 LED cabinet

Physical

Pixel pitch
0.9375 mm
Cabinet size (W×H×D)
600 × 338 × 38 mm
Weight
5 kg
Weight per m²
24.7 kg/m²
Cabinet type
Fixed install
Service access
Front

Image

Cabinet resolution
640 × 360 px (16:9)
Pixel density
1,137,778 px/m²
Brightness (calibrated)
550 nits
Refresh rate
4,000 Hz
Contrast
6,000:1
Viewing angle (H/V)
170° / 170°
LED type
IMD

Power & thermal

Max power
130 W
Average power
60 W
Max power per m²
642 W/m²
Average power per m²
296 W/m²
Thermal load
444 BTU/h per cabinet

Environment

Rated for
Indoor
IP rating (front)
IP30
IP rating (rear)
IP30
Operating temperature
-10 to 40 °C
LED lifetime
100,000 h

Manufacturer details

Power supply
AC100-240V 50/60Hz
Site category
Fixed Installation
Pitch published
0.9375mm
Cabinet material
die-cast aluminium, black
Operating humidity
10-80% RH
Pixel configuration
MINI (AOTO Mini 4-in-1 IMD), 1R1G1B

All variations in the CV MINI series

All AOTO cabinets →

Every AOTO CV MINI series cabinet and the exact pitch, size and brightness pairing it ships with.

  • CVES0.9this model0.9375 mm600×338 mm550 nits
  • AOTO CVES1.21.25 mm600×338 mm600 nits
  • AOTO CVES1.51.5625 mm600×338 mm600 nits

Controllers that drive this panel

All controllers →

Each cabinet carries 230,400 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.

Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open AOTO CVES0.9 in the calculator to lay out the real chains and validate them.

Design a wall with this panel

Frequently asked

How much power does the AOTO CVES0.9 draw?
Each AOTO CVES0.9 cabinet draws up to 130 W at full white and about 60 W with typical content — 642 W/m² max. A 10-cabinet wall therefore needs up to 1,300 W plus headroom.
What is the resolution of the AOTO CVES0.9?
One cabinet is 640 × 360 pixels at a 0.9375 mm pixel pitch (1,137,778 px/m²). About 6 cabinets side by side reach 4K width (≈ 3.60 m).
How heavy is a AOTO CVES0.9 wall?
A single cabinet weighs 5 kg (24.7 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 75 kg before mounting structure.
Is the AOTO CVES0.9 suitable for outdoor use?
No — the AOTO CVES0.9 is an indoor cabinet (IP30 front). Its 550 nits suit controlled lighting, not direct sun.

Size a wall with the CVES0.9

Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.