Unilumin UMini III 0.9 specs
This is Unilumin's best-selling professional screen, the original COB product line, now in its third generation. Ranging from 0.9 to 1.8 pixel pitch with slimline cabinets, low power consumption, high contrast ratio and high refresh rate, this is the COB display of choice for consultants and professional end-users all around the world.
Physical
- Pixel pitch
- 0.9375 mm
- Cabinet size (W×H×D)
- 600 × 338 × 40 mm
- Weight
- 6 kg
- Weight per m²
- 29.6 kg/m²
- Cabinet type
- Fixed install
- Service access
- Front & rear
Image
- Cabinet resolution
- 640 × 360 px (16:9)
- Pixel density
- 1,137,778 px/m²
- Brightness (calibrated)
- 600 nits
- Refresh rate
- 3,840 Hz
- Contrast
- 10,000:1
- Viewing angle (H/V)
- 180° / 180°
- LED type
- COB
- Processing depth
- 19 bit
Power & thermal
- Max power
- 70 W
- Average power
- 45 W
- Max power per m²
- 346 W/m²
- Average power per m²
- 222 W/m²
- Thermal load
- 239 BTU/h per cabinet
Environment
- Rated for
- Indoor
- IP rating (front)
- IP50
- IP rating (rear)
- IP50
- Operating temperature
- -10 to 45 °C
- LED lifetime
- 100,000 h
- Certifications
- UL, FCC, IC, CE, CB, RoHS2.0, EAC, CCC, CQC, Low Blue Light, Class B
Manufacturer details
- Power supply
- 100~240 V (50&60Hz)
- Storage temp
- -40℃~+60℃
- Site category
- Professional
- Frame rates hz
- 50/60Hz
- Pitch published
- 0.9375
- Power published
- ≤70 W/panel; ≤346W/㎡ | @1200nits ≤100W/panel
- Cabinet material
- Die-cast Aluminum
- Color temperature
- 2,000K-9,500K Adjustable
- Datasheet version
- V1.5 2023/12/31
- Module dimensions
- 300mm×168.75mm
- Operating humidity
- 10~80% RH
- Pixel configuration
- Fully flip chip COB
- Brightness published
- 600cd/m² 1200cd/m²
All variations in the UMini III series
All Unilumin cabinets →Every Unilumin UMini III series cabinet and the exact pitch, size and brightness pairing it ships with.
- UMini III 0.9this model0.9375 mm600×338 mm600 nits
- Unilumin UMini III 1.11.17188 mm600×338 mm600 nits
- Unilumin UMini III 1.21.25 mm600×338 mm600 nits
- Unilumin UMini III 1.51.5625 mm600×338 mm600 nits
Controllers that drive this panel
All controllers →Each cabinet carries 230,400 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.
- Colorlight U15 MaxColorlightConfirm ecosystem
800cabinets
400 × Mixed520M px total · port-bound
Wire it - NovaStar H20NovaStarConfirm ecosystem
800cabinets
400 × Mixed260M px total · port-bound
Wire it - NovaStar MX6000 ProNovaStarConfirm ecosystem
611cabinets
64 × Mixed141M px total · capacity-bound
Wire it - NovaStar H15NovaStarConfirm ecosystem
400cabinets
200 × Mixed130M px total · port-bound
Wire it - Colorlight U9 MaxColorlightConfirm ecosystem
200cabinets
100 × Mixed260M px total · port-bound
Wire it - Colorlight U6 MaxColorlightConfirm ecosystem
200cabinets
100 × Mixed130M px total · port-bound
Wire it
Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open Unilumin UMini III 0.9 in the calculator to lay out the real chains and validate them.
Design a wall with this panelFrequently asked
- How much power does the Unilumin UMini III 0.9 draw?
- Each Unilumin UMini III 0.9 cabinet draws up to 70 W at full white and about 45 W with typical content — 346 W/m² max. A 10-cabinet wall therefore needs up to 700 W plus headroom.
- What is the resolution of the Unilumin UMini III 0.9?
- One cabinet is 640 × 360 pixels at a 0.9375 mm pixel pitch (1,137,778 px/m²). About 6 cabinets side by side reach 4K width (≈ 3.60 m).
- How heavy is a Unilumin UMini III 0.9 wall?
- A single cabinet weighs 6 kg (29.6 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 90 kg before mounting structure.
- Is the Unilumin UMini III 0.9 suitable for outdoor use?
- No — the Unilumin UMini III 0.9 is an indoor cabinet (IP50 front). Its 600 nits suit controlled lighting, not direct sun.
Size a wall with the UMini III 0.9
Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.