Skip to content
wikiLED
1.95 mm pitchIndoorIMD

Absen PL1.9 Pro V10 specs

Mainstream Indoor & Outdoor Rental Solution

Absen PL1.9 Pro V10 LED cabinet

Physical

Pixel pitch
1.95 mm
Cabinet size (W×H×D)
500 × 500 × 88 mm
Weight
9 kg
Weight per m²
36 kg/m²
Cabinet type
Rental & staging
Service access
Front & rear

Image

Cabinet resolution
256 × 256 px (1:1)
Pixel density
262,144 px/m²
Brightness (calibrated)
1,200 nits
Refresh rate
3,840 Hz
Contrast
5,500:1
Viewing angle (H/V)
140° / 140°
LED type
IMD
Processing depth
16 bit

Power & thermal

Max power
180 W
Average power
60 W
Max power per m²
720 W/m²
Average power per m²
240 W/m²
Thermal load
614 BTU/h per cabinet

Environment

Rated for
Indoor
IP rating (front)
IP40
IP rating (rear)
IP21
Operating temperature
10 to 40 °C
LED lifetime
100,000 h
Certifications
CE, ETL, FCC, RoHS

Manufacturer details

Power supply
100 to 240
Cabinet material
Die-casting aluminum
Short description
• Up to 1500nits brightness U • p to 16bit grayscale • 3840/ 7680Hz refresh rate • Innovative IMD technology (applied to PL1.9 Pro V10) • UltraBlack technology (applied to PL2.5 Pro V10)
Operating humidity
10 ~ 90%
Pixel configuration
IMD 4in1

All variations in the Polaris series

All Absen cabinets →

Every Absen Polaris series cabinet and the exact pitch, size and brightness pairing it ships with.

Controllers that drive this panel

All controllers →

Each cabinet carries 65,536 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.

Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open Absen PL1.9 Pro V10 in the calculator to lay out the real chains and validate them.

Design a wall with this panel

Frequently asked

How much power does the Absen PL1.9 Pro V10 draw?
Each Absen PL1.9 Pro V10 cabinet draws up to 180 W at full white and about 60 W with typical content — 720 W/m² max. A 10-cabinet wall therefore needs up to 1,800 W plus headroom.
What is the resolution of the Absen PL1.9 Pro V10?
One cabinet is 256 × 256 pixels at a 1.95 mm pixel pitch (262,144 px/m²). About 15 cabinets side by side reach 4K width (≈ 7.50 m).
How heavy is a Absen PL1.9 Pro V10 wall?
A single cabinet weighs 9 kg (36 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 135 kg before mounting structure.
Is the Absen PL1.9 Pro V10 suitable for outdoor use?
No — the Absen PL1.9 Pro V10 is an indoor cabinet (IP40 front). Its 1,200 nits suit controlled lighting, not direct sun.

Size a wall with the PL1.9 Pro V10

Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.