Absen CL1.2 V2 specs
Indoor fixed-installation LED cabinet with a 1.27 mm pixel pitch, 610 × 343 mm panels and 1,200 nit brightness (COB).
Physical
- Pixel pitch
- 1.27 mm
- Cabinet size (W×H×D)
- 610 × 343 × 50 mm
- Weight
- 5.8 kg
- Weight per m²
- 27.7 kg/m²
- Cabinet type
- Fixed install
- Service access
- Front
Image
- Cabinet resolution
- 480 × 270 px (16:9)
- Pixel density
- 619,414 px/m²
- Brightness (calibrated)
- 1,200 nits
- Refresh rate
- 3,840 Hz
- Contrast
- 20,000:1
- Viewing angle (H/V)
- 160° / 160°
- LED type
- COB
- Processing depth
- 13 bit
Power & thermal
- Max power
- 104 W
- Average power
- 35 W
- Max power per m²
- 497 W/m²
- Average power per m²
- 167 W/m²
- Thermal load
- 355 BTU/h per cabinet
Environment
- Rated for
- Indoor
- IP rating (front)
- IP40
- IP rating (rear)
- IP21
- Operating temperature
- 10 to 40 °C
- LED lifetime
- 100,000 h
- Certifications
- CE, ETL, FCC, RoHS
Manufacturer details
- Power supply
- 100 to 240
- Cabinet material
- Die-casting aluminum
- Short description
- • Black calibration technology • Single flip chip technology
- Operating humidity
- 10 ~ 80%
- Pixel configuration
- Flip Chip RGB
All variations in the Clear Cobalt V2 series
All Absen cabinets →Every Absen Clear Cobalt V2 series cabinet and the exact pitch, size and brightness pairing it ships with.
- Absen CL0.9 V20.95 mm610×343 mm1,000 nits
- CL1.2 V2this model1.27 mm610×343 mm1,200 nits
Controllers that drive this panel
All controllers →Each cabinet carries 129,600 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.
- Colorlight U15 MaxColorlightConfirm ecosystem
2,000cabinets
400 × Mixed520M px total · port-bound
Wire it - NovaStar H20NovaStarConfirm ecosystem
2,000cabinets
400 × Mixed260M px total · port-bound
Wire it - NovaStar MX6000 ProNovaStarConfirm ecosystem
1,087cabinets
64 × Mixed141M px total · capacity-bound
Wire it - NovaStar H15NovaStarConfirm ecosystem
1,000cabinets
200 × Mixed130M px total · port-bound
Wire it - Colorlight U9 MaxColorlightConfirm ecosystem
500cabinets
100 × Mixed260M px total · port-bound
Wire it - Colorlight U6 MaxColorlightConfirm ecosystem
500cabinets
100 × Mixed130M px total · port-bound
Wire it
Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open Absen CL1.2 V2 in the calculator to lay out the real chains and validate them.
Design a wall with this panelFrequently asked
- How much power does the Absen CL1.2 V2 draw?
- Each Absen CL1.2 V2 cabinet draws up to 104 W at full white and about 35 W with typical content — 497 W/m² max. A 10-cabinet wall therefore needs up to 1,040 W plus headroom.
- What is the resolution of the Absen CL1.2 V2?
- One cabinet is 480 × 270 pixels at a 1.27 mm pixel pitch (619,414 px/m²). About 8 cabinets side by side reach 4K width (≈ 4.88 m).
- How heavy is a Absen CL1.2 V2 wall?
- A single cabinet weighs 5.8 kg (27.7 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 87 kg before mounting structure.
- Is the Absen CL1.2 V2 suitable for outdoor use?
- No — the Absen CL1.2 V2 is an indoor cabinet (IP40 front). Its 1,200 nits suit controlled lighting, not direct sun.
Size a wall with the CL1.2 V2
Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.