AOTO CB1.2 specs
CB series features a multi-layer composite optical structure design, which enhances light uniformity, reduces light loss, and ensures consistency in black levels and color.
Physical
- Pixel pitch
- 1.25 mm
- Cabinet size (W×H×D)
- 600 × 338 × 40 mm
- Weight
- 4 kg
- Weight per m²
- 19.8 kg/m²
- Cabinet type
- Fixed install
- Service access
- Front
Image
- Cabinet resolution
- 480 × 270 px (16:9)
- Pixel density
- 640,000 px/m²
- Brightness (calibrated)
- 1,000 nits
- Refresh rate
- 7,680 Hz
- Contrast
- 15,000:1
- Viewing angle (H/V)
- 160° / 160°
- LED type
- COB
Power & thermal
- Max power
- 100 W
- Average power
- 35 W
- Max power per m²
- 494 W/m²
- Average power per m²
- 173 W/m²
- Thermal load
- 341 BTU/h per cabinet
Environment
- Rated for
- Indoor
- IP rating (front)
- IP65
- IP rating (rear)
- IP30
- Operating temperature
- -10 to 40 °C
- LED lifetime
- 100,000 h
Manufacturer details
- Emc
- Class A
- Scan rate
- 1/30
- Ip published
- IP30 (front surface IP65)
- Power supply
- AC100-240V 50/60Hz
- Site category
- Fixed Installation
- Pitch published
- 1.25
- Cabinet material
- die-cast aluminium, black
- Weight published
- 4±0.5 kg
- Module dimensions
- 150×168.75 mm
- Module resolution
- 120×135
- Operating humidity
- 10-90% RH
- Pixel configuration
- COB 1R1G1B
Controllers that drive this panel
All controllers →Each cabinet carries 129,600 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.
- Colorlight U15 MaxColorlightConfirm ecosystem
2,000cabinets
400 × Mixed520M px total · port-bound
Wire it - NovaStar H20NovaStarConfirm ecosystem
2,000cabinets
400 × Mixed260M px total · port-bound
Wire it - NovaStar MX6000 ProNovaStarConfirm ecosystem
1,087cabinets
64 × Mixed141M px total · capacity-bound
Wire it - NovaStar H15NovaStarConfirm ecosystem
1,000cabinets
200 × Mixed130M px total · port-bound
Wire it - Colorlight U9 MaxColorlightConfirm ecosystem
500cabinets
100 × Mixed260M px total · port-bound
Wire it - Colorlight U6 MaxColorlightConfirm ecosystem
500cabinets
100 × Mixed130M px total · port-bound
Wire it
Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open AOTO CB1.2 in the calculator to lay out the real chains and validate them.
Design a wall with this panelFrequently asked
- How much power does the AOTO CB1.2 draw?
- Each AOTO CB1.2 cabinet draws up to 100 W at full white and about 35 W with typical content — 494 W/m² max. A 10-cabinet wall therefore needs up to 1,000 W plus headroom.
- What is the resolution of the AOTO CB1.2?
- One cabinet is 480 × 270 pixels at a 1.25 mm pixel pitch (640,000 px/m²). About 8 cabinets side by side reach 4K width (≈ 4.80 m).
- How heavy is a AOTO CB1.2 wall?
- A single cabinet weighs 4 kg (19.8 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 60 kg before mounting structure.
- Is the AOTO CB1.2 suitable for outdoor use?
- No — the AOTO CB1.2 is an indoor cabinet (IP65 front). Its 1,000 nits suit controlled lighting, not direct sun.
Size a wall with the CB1.2
Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.