Skip to content
wikiLED
0.95 mm pitchIndoorCOB

Absen CL0.9 V2 specs

Indoor fixed-installation LED cabinet with a 0.95 mm pixel pitch, 610 × 343 mm panels and 1,000 nit brightness (COB).

Pitch
0.95 mm1.27 mm
Size
610×343 mm
Nits
1,000 nits1,200 nits
Open in calculatorCompareControllersRunning cost
Absen CL0.9 V2 LED cabinet

Physical

Pixel pitch
0.95 mm
Cabinet size (W×H×D)
610 × 343 × 50 mm
Weight
5.8 kg
Weight per m²
27.7 kg/m²
Cabinet type
Fixed install
Service access
Front

Image

Cabinet resolution
640 × 360 px (16:9)
Pixel density
1,101,181 px/m²
Brightness (calibrated)
1,000 nits
Refresh rate
3,840 Hz
Contrast
20,000:1
Viewing angle (H/V)
160° / 160°
LED type
COB
Processing depth
16 bit

Power & thermal

Max power
88 W
Average power
30 W
Max power per m²
421 W/m²
Average power per m²
143 W/m²
Thermal load
300 BTU/h per cabinet

Environment

Rated for
Indoor
IP rating (front)
IP40
IP rating (rear)
IP21
Operating temperature
10 to 40 °C
LED lifetime
100,000 h
Certifications
CE, ETL, FCC, RoHS

Manufacturer details

Power supply
100 to 240
Cabinet material
Die-casting aluminum
Short description
• Black calibration technology • Single flip chip technology
Operating humidity
10 ~ 80%
Pixel configuration
Flip Chip RGB

All variations in the Clear Cobalt V2 series

All Absen cabinets →

Every Absen Clear Cobalt V2 series cabinet and the exact pitch, size and brightness pairing it ships with.

  • CL0.9 V2this model0.95 mm610×343 mm1,000 nits
  • Absen CL1.2 V21.27 mm610×343 mm1,200 nits

Controllers that drive this panel

All controllers →

Each cabinet carries 230,400 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.

Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open Absen CL0.9 V2 in the calculator to lay out the real chains and validate them.

Design a wall with this panel

Frequently asked

How much power does the Absen CL0.9 V2 draw?
Each Absen CL0.9 V2 cabinet draws up to 88 W at full white and about 30 W with typical content — 421 W/m² max. A 10-cabinet wall therefore needs up to 880 W plus headroom.
What is the resolution of the Absen CL0.9 V2?
One cabinet is 640 × 360 pixels at a 0.95 mm pixel pitch (1,101,181 px/m²). About 6 cabinets side by side reach 4K width (≈ 3.66 m).
How heavy is a Absen CL0.9 V2 wall?
A single cabinet weighs 5.8 kg (27.7 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 87 kg before mounting structure.
Is the Absen CL0.9 V2 suitable for outdoor use?
No — the Absen CL0.9 V2 is an indoor cabinet (IP40 front). Its 1,000 nits suit controlled lighting, not direct sun.

Size a wall with the CL0.9 V2

Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.

Open in calculatorCompare with competitors