Skip to content
wikiLED
5.95 mm pitchIndoorSMD

INFiLED IRAR5.9 AD specs

The complete LED ecosystem for virtual production — ceiling, background, and floor, engineered together for flicker-free filming and in-camera realism.

Pitch
1.5 mm1.56 mm1.95 mm2.56 mm2.6 mm2.84 mm3.91 mm5.95 mm
Size
500×500 mm500×1000 mm
Nits
1,500 nits1,400 nits1,200 nits1,000 nits2,000 nits5,000 nits8,000 nits
Open in calculatorCompareControllersRunning costDatasheet
INFiLED IRAR5.9 AD LED cabinet

Physical

Pixel pitch
5.95 mm
Cabinet size (W×H×D)
500 × 1,000 × 33 mm
Weight
10.9 kg
Weight per m²
21.8 kg/m²
Cabinet type
Production
Service access
Front & rear

Image

Cabinet resolution
84 × 168 px (1:2)
Pixel density
28,224 px/m²
Brightness (calibrated)
5,000 nits
Refresh rate
7,680 Hz
Contrast
6,000:1
Viewing angle (H/V)
160° / 160°
LED type
SMD
Processing depth
16 bit

Power & thermal

Max power
360 W
Average power
120 W
Max power per m²
720 W/m²
Average power per m²
240 W/m²
Thermal load
1,228 BTU/h per cabinet

Environment

Rated for
Indoor
IP rating (front)
IP30
IP rating (rear)
IP30
Operating temperature
-10 to 45 °C
LED lifetime
100,000 h
Certifications
CE, ETL, FCC, RoHS, REACH, WEEE, Fireproof

Manufacturer details

Driver ic
ICND2055S
Scan rate
1/7
Brochure url
https://www.infiled.com/wp-content/uploads/2024/01/broadcaststudio_ise_digital.pdf
Control mode
Synchronous Display
Power supply
100-240V AC, 50/60Hz
Signal input
DVI, HDMI, DP, SDI
Transparency
0%
Site category
XR / VP
Display colors
281T
Frame rates hz
50-60Hz
Led wavelength
R:615-630nm/G:515-535nm/B:465-480nm
Receiving card
Brompton
Pitch published
5,95mm
Power published
360 / 120 W/panel (max / avg)
Cabinet material
Aluminum Alloy
Control distance
Ethernetcable ≤ 120m or Fiber Optic ≤ 15km
Physical density
28.224 pixels/㎡
Weight published
10,9kg (24,03lb)
Color temperature
6500K (3000K~10000K adjustable）
Module dimensions
250x500mm
Module resolution
42x84pixels
Contrast published
6000:1
Lifetime published
≥100000h
Operating humidity
10-90% RH Non-condensing
Grayscale published
16bit
Pixel configuration
3-in-1 SMD
Brightness published
5000nits
Brightness adjustment
0～100% (256 levels)
Service access published
Front/Rear

All variations in the STUDIO series

All INFiLED cabinets →

Every INFiLED STUDIO series cabinet and the exact pitch, size and brightness pairing it ships with.

Controllers that drive this panel

All controllers →

Each cabinet carries 14,112 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.

Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open INFiLED IRAR5.9 AD in the calculator to lay out the real chains and validate them.

Design a wall with this panel

Frequently asked

How much power does the INFiLED IRAR5.9 AD draw?
Each INFiLED IRAR5.9 AD cabinet draws up to 360 W at full white and about 120 W with typical content — 720 W/m² max. A 10-cabinet wall therefore needs up to 3,600 W plus headroom.
What is the resolution of the INFiLED IRAR5.9 AD?
One cabinet is 84 × 168 pixels at a 5.95 mm pixel pitch (28,224 px/m²). About 46 cabinets side by side reach 4K width (≈ 23.00 m).
How heavy is a INFiLED IRAR5.9 AD wall?
A single cabinet weighs 10.9 kg (21.8 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 164 kg before mounting structure.
Is the INFiLED IRAR5.9 AD suitable for outdoor use?
No — the INFiLED IRAR5.9 AD is an indoor cabinet (IP30 front). Its 5,000 nits suit controlled lighting, not direct sun.

Size a wall with the IRAR5.9 AD

Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.

Open in calculatorCompare with competitors