Skip to content
wikiLED
1.875 mm pitchIndoorSMD

AOTO C1.8 specs

The C Series is a lightweight, high-definition product that supports curved installation and meets the diverse needs of creative LED displays. Equipped with a magnetic adsorption module, it allows front maintenance, realizes seamless connectivity, and features higher dynamic range color management, providing greater imagination for creative display applications.

Pitch
1.875 mm2.5 mm3 mm
Size
480×480 mm
Nits
1,000 nits1,200 nits
Open in calculatorCompareControllersRunning cost
AOTO C1.8 LED cabinet

Physical

Pixel pitch
1.875 mm
Cabinet size (W×H×D)
480 × 480 × 82 mm
Weight
3.9 kg
Weight per m²
16.8 kg/m²
Cabinet type
Fixed install
Service access
Front & rear

Image

Cabinet resolution
256 × 256 px (1:1)
Pixel density
284,444 px/m²
Brightness (calibrated)
1,000 nits
Refresh rate
3,000 Hz
Contrast
3,000:1
Viewing angle (H/V)
160° / 160°
LED type
SMD

Power & thermal

Max power
110 W
Average power
45 W
Max power per m²
477 W/m²
Average power per m²
195 W/m²
Thermal load
375 BTU/h per cabinet

Environment

Rated for
Indoor
IP rating (front)
IP30
IP rating (rear)
IP30
Operating temperature
-10 to 40 °C

Manufacturer details

Usage
creative (curved / shaped walls)
Power supply
AC100-240V 50/60Hz
Site category
Creative
Pitch published
1.875 mm
Cabinet material
aluminium alloy, black
Weight published
3.88 kg (frame excluded)
Operating humidity
10-80% RH
Pixel configuration
SMD 3-in-1, 1R1G1B

All variations in the C series

All AOTO cabinets →

Every AOTO C series cabinet and the exact pitch, size and brightness pairing it ships with.

  • C1.8this model1.875 mm480×480 mm1,000 nits
  • AOTO C2.52.5 mm480×480 mm1,200 nits
  • AOTO C33 mm480×480 mm1,200 nits

Controllers that drive this panel

All controllers →

Each cabinet carries 65,536 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.

Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open AOTO C1.8 in the calculator to lay out the real chains and validate them.

Design a wall with this panel

Frequently asked

How much power does the AOTO C1.8 draw?
Each AOTO C1.8 cabinet draws up to 110 W at full white and about 45 W with typical content — 477 W/m² max. A 10-cabinet wall therefore needs up to 1,100 W plus headroom.
What is the resolution of the AOTO C1.8?
One cabinet is 256 × 256 pixels at a 1.875 mm pixel pitch (284,444 px/m²). About 15 cabinets side by side reach 4K width (≈ 7.20 m).
How heavy is a AOTO C1.8 wall?
A single cabinet weighs 3.9 kg (16.8 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 58 kg before mounting structure.
Is the AOTO C1.8 suitable for outdoor use?
No — the AOTO C1.8 is an indoor cabinet (IP30 front). Its 1,000 nits suit controlled lighting, not direct sun.

Size a wall with the C1.8

Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.

Open in calculatorCompare with competitors