AOTO C3 specs
The C Series is a lightweight, high-definition product that supports curved installation and meets the diverse needs of creative LED displays. Equipped with a magnetic adsorption module, it allows front maintenance, realizes seamless connectivity, and features higher dynamic range color management, providing greater imagination for creative display applications.
Physical
- Pixel pitch
- 3 mm
- Cabinet size (W×H×D)
- 480 × 480 × 82 mm
- Weight
- 3.9 kg
- Weight per m²
- 16.8 kg/m²
- Cabinet type
- Fixed install
- Service access
- Front & rear
Image
- Cabinet resolution
- 160 × 160 px (1:1)
- Pixel density
- 111,111 px/m²
- Brightness (calibrated)
- 1,200 nits
- Refresh rate
- 3,000 Hz
- Contrast
- 3,000:1
- Viewing angle (H/V)
- 160° / 160°
- LED type
- SMD
Power & thermal
- Max power
- 116 W
- Average power
- 45 W
- Max power per m²
- 503 W/m²
- Average power per m²
- 195 W/m²
- Thermal load
- 396 BTU/h per cabinet
Environment
- Rated for
- Indoor
- IP rating (front)
- IP30
- IP rating (rear)
- IP30
- Operating temperature
- -10 to 40 °C
Manufacturer details
- Usage
- creative (curved / shaped walls)
- Power supply
- AC100-240V 50/60Hz
- Site category
- Creative
- Pitch published
- 3 mm
- Cabinet material
- aluminium alloy, black
- Weight published
- 3.88 kg (frame excluded)
- Operating humidity
- 10-80% RH
- Pixel configuration
- SMD 3-in-1, 1R1G1B
All variations in the C series
All AOTO cabinets →Every AOTO C series cabinet and the exact pitch, size and brightness pairing it ships with.
Controllers that drive this panel
All controllers →Each cabinet carries 25,600 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.
- Colorlight U15 MaxColorlightConfirm ecosystem
10,000cabinets
400 × Mixed520M px total · port-bound
Wire it - NovaStar H20NovaStarConfirm ecosystem
10,000cabinets
400 × Mixed260M px total · port-bound
Wire it - NovaStar MX6000 ProNovaStarConfirm ecosystem
5,507cabinets
64 × Mixed141M px total · capacity-bound
Wire it - NovaStar H15NovaStarConfirm ecosystem
5,000cabinets
200 × Mixed130M px total · port-bound
Wire it - Colorlight U9 MaxColorlightConfirm ecosystem
2,500cabinets
100 × Mixed260M px total · port-bound
Wire it - Colorlight U6 MaxColorlightConfirm ecosystem
2,500cabinets
100 × Mixed130M px total · port-bound
Wire it
Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open AOTO C3 in the calculator to lay out the real chains and validate them.
Design a wall with this panelFrequently asked
- How much power does the AOTO C3 draw?
- Each AOTO C3 cabinet draws up to 116 W at full white and about 45 W with typical content — 503 W/m² max. A 10-cabinet wall therefore needs up to 1,160 W plus headroom.
- What is the resolution of the AOTO C3?
- One cabinet is 160 × 160 pixels at a 3 mm pixel pitch (111,111 px/m²). About 24 cabinets side by side reach 4K width (≈ 11.52 m).
- How heavy is a AOTO C3 wall?
- A single cabinet weighs 3.9 kg (16.8 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 58 kg before mounting structure.
- Is the AOTO C3 suitable for outdoor use?
- No — the AOTO C3 is an indoor cabinet (IP30 front). Its 1,200 nits suit controlled lighting, not direct sun.
Size a wall with the C3
Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.