Absen SA2.6-C specs
The Saturn-C (SA-C) series flexible display adapts to your creative vision, forming flawless curves that blend naturally. It can be connected with the Saturn (SA) series to create surprise stages.
Physical
- Pixel pitch
- 2.6 mm
- Cabinet size (W×H×D)
- 500 × 500 × 100 mm
- Weight
- 8.5 kg
- Weight per m²
- 34 kg/m²
- Cabinet type
- Rental & staging
- Service access
- Rear
Image
- Cabinet resolution
- 192 × 192 px (1:1)
- Pixel density
- 147,456 px/m²
- Brightness (calibrated)
- 1,500 nits
- Refresh rate
- 7,680 Hz
- Contrast
- 8,000:1
- Viewing angle (H/V)
- 160° / 160°
- LED type
- SMD
- Processing depth
- 16 bit
Power & thermal
- Max power
- 135 W
- Average power
- 45 W
- Max power per m²
- 540 W/m²
- Average power per m²
- 180 W/m²
- Thermal load
- 461 BTU/h per cabinet
Environment
- Rated for
- Indoor
- IP rating (front)
- IP40
- IP rating (rear)
- IP21
- Operating temperature
- -10 to 40 °C
- LED lifetime
- 100,000 h
- Certifications
- CE, ETL, FCC, RoHS
Manufacturer details
- Power supply
- 100 to 240
- Cabinet material
- Die-casting magnesium
- Short description
- • SA-C series adopts the most classic gear transmission solution • Easily adjust the display's outer or inner curve with a simple ring rotation, operable by one person • Only 8.5kg per panel with 2 set of curve mechanisms • 12 panels can be assembled into a cylinder • SA-C can be combined with the SA conventional panels • Only 3 columns of SA-C panels are needed to create 90° arc angles
- Operating humidity
- 10 ~ 90%
- Pixel configuration
- Black SMD 3in1 1515
All variations in the Saturn-C series
All Absen cabinets →Every Absen Saturn-C series cabinet and the exact pitch, size and brightness pairing it ships with.
- Absen SA1.9-C1.95 mm500×500 mm1,500 nits
- SA2.6-Cthis model2.6 mm500×500 mm1,500 nits
Controllers that drive this panel
All controllers →Each cabinet carries 36,864 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.
- Colorlight U15 MaxColorlightConfirm ecosystem
6,800cabinets
400 × Mixed520M px total · port-bound
Wire it - NovaStar H20NovaStarConfirm ecosystem
6,800cabinets
400 × Mixed260M px total · port-bound
Wire it - NovaStar MX6000 ProNovaStarConfirm ecosystem
3,824cabinets
64 × Mixed141M px total · capacity-bound
Wire it - NovaStar H15NovaStarConfirm ecosystem
3,400cabinets
200 × Mixed130M px total · port-bound
Wire it - Colorlight U9 MaxColorlightConfirm ecosystem
1,700cabinets
100 × Mixed260M px total · port-bound
Wire it - Colorlight U6 MaxColorlightConfirm ecosystem
1,700cabinets
100 × Mixed130M px total · port-bound
Wire it
Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open Absen SA2.6-C in the calculator to lay out the real chains and validate them.
Design a wall with this panelFrequently asked
- How much power does the Absen SA2.6-C draw?
- Each Absen SA2.6-C cabinet draws up to 135 W at full white and about 45 W with typical content — 540 W/m² max. A 10-cabinet wall therefore needs up to 1,350 W plus headroom.
- What is the resolution of the Absen SA2.6-C?
- One cabinet is 192 × 192 pixels at a 2.6 mm pixel pitch (147,456 px/m²). About 20 cabinets side by side reach 4K width (≈ 10.00 m).
- How heavy is a Absen SA2.6-C wall?
- A single cabinet weighs 8.5 kg (34 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 128 kg before mounting structure.
- Is the Absen SA2.6-C suitable for outdoor use?
- No — the Absen SA2.6-C is an indoor cabinet (IP40 front). Its 1,500 nits suit controlled lighting, not direct sun.
Size a wall with the SA2.6-C
Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.