AOTO RM2.6 specs
AOTO brand new rental LED display products RME series is featured with simple structure, lightweight cabinet, fast assembly, and high reliability.
Physical
- Pixel pitch
- 2.60417 mm
- Cabinet size (W×H×D)
- 500 × 500 × 68 mm
- Weight
- 8.2 kg
- Weight per m²
- 32.8 kg/m²
- Cabinet type
- Rental & staging
- Service access
- Front & rear
Image
- Cabinet resolution
- 192 × 192 px (1:1)
- Pixel density
- 147,456 px/m²
- Brightness (calibrated)
- 1,500 nits
- Refresh rate
- 7,680 Hz
- Contrast
- 3,000:1
- Viewing angle (H/V)
- 170° / 170°
- LED type
- SMD
Power & thermal
- Max power
- 140 W
- Average power
- 50 W
- Max power per m²
- 560 W/m²
- Average power per m²
- 200 W/m²
- Thermal load
- 478 BTU/h per cabinet
Environment
- Rated for
- Indoor
- IP rating (front)
- IP30
- IP rating (rear)
- IP30
- Operating temperature
- -10 to 40 °C
Manufacturer details
- Scan rate
- 1/12
- Power supply
- AC100-240V 50/60Hz
- Site category
- Rental Staging
- Pitch published
- 2.6mm
- Cabinet material
- Mg-Al alloy, black
- Module dimensions
- 250×250 mm
- Module resolution
- 96×96
- Refresh published
- ≥7,680Hz
- Contrast published
- ≥3,000:1
- Operating humidity
- 10-80% RH
- Pixel configuration
- SMD 1R1G1B
Controllers that drive this panel
All controllers →Each cabinet carries 36,864 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.
- Colorlight U15 MaxColorlightConfirm ecosystem
6,800cabinets
400 × Mixed520M px total · port-bound
Wire it - NovaStar H20NovaStarConfirm ecosystem
6,800cabinets
400 × Mixed260M px total · port-bound
Wire it - NovaStar MX6000 ProNovaStarConfirm ecosystem
3,824cabinets
64 × Mixed141M px total · capacity-bound
Wire it - NovaStar H15NovaStarConfirm ecosystem
3,400cabinets
200 × Mixed130M px total · port-bound
Wire it - Colorlight U9 MaxColorlightConfirm ecosystem
1,700cabinets
100 × Mixed260M px total · port-bound
Wire it - Colorlight U6 MaxColorlightConfirm ecosystem
1,700cabinets
100 × Mixed130M px total · port-bound
Wire it
Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open AOTO RM2.6 in the calculator to lay out the real chains and validate them.
Design a wall with this panelFrequently asked
- How much power does the AOTO RM2.6 draw?
- Each AOTO RM2.6 cabinet draws up to 140 W at full white and about 50 W with typical content — 560 W/m² max. A 10-cabinet wall therefore needs up to 1,400 W plus headroom.
- What is the resolution of the AOTO RM2.6?
- One cabinet is 192 × 192 pixels at a 2.60417 mm pixel pitch (147,456 px/m²). About 20 cabinets side by side reach 4K width (≈ 10.00 m).
- How heavy is a AOTO RM2.6 wall?
- A single cabinet weighs 8.2 kg (32.8 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 123 kg before mounting structure.
- Is the AOTO RM2.6 suitable for outdoor use?
- No — the AOTO RM2.6 is an indoor cabinet (IP30 front). Its 1,500 nits suit controlled lighting, not direct sun.
Size a wall with the RM2.6
Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.