Skip to content
wikiLED
1.95 mm pitchIndoorIMD

Absen SA1.9-C specs

The Saturn-C (SA-C) series flexible display adapts to your creative vision, forming flawless curves that blend naturally. It can be connected with the Saturn (SA) series to create surprise stages.

Pitch
1.95 mm2.6 mm
Size
500×500 mm
Nits
1,500 nits
Absen SA1.9-C LED cabinet

Physical

Pixel pitch
1.95 mm
Cabinet size (W×H×D)
500 × 500 × 100 mm
Weight
8.5 kg
Weight per m²
34 kg/m²
Cabinet type
Rental & staging
Service access
Rear

Image

Cabinet resolution
256 × 256 px (1:1)
Pixel density
262,144 px/m²
Brightness (calibrated)
1,500 nits
Refresh rate
7,680 Hz
Contrast
5,500:1
Viewing angle (H/V)
160° / 140°
LED type
IMD
Processing depth
16 bit

Power & thermal

Max power
110 W
Average power
37 W
Max power per m²
440 W/m²
Average power per m²
148 W/m²
Thermal load
375 BTU/h per cabinet

Environment

Rated for
Indoor
IP rating (front)
IP40
IP rating (rear)
IP21
Operating temperature
-10 to 40 °C
LED lifetime
100,000 h
Certifications
CE, ETL, FCC, RoHS

Manufacturer details

Power supply
100 to 240
Cabinet material
Die-casting magnesium
Short description
• SA-C series adopts the most classic gear transmission solution • Easily adjust the display's outer or inner curve with a simple ring rotation, operable by one person • Only 8.5kg per panel with 2 set of curve mechanisms • 12 panels can be assembled into a cylinder • SA-C can be combined with the SA conventional panels • Only 3 columns of SA-C panels are needed to create 90° arc angles
Operating humidity
10 ~ 90%
Pixel configuration
Flip Chip IMD 4-in-1

All variations in the Saturn-C series

All Absen cabinets →

Every Absen Saturn-C series cabinet and the exact pitch, size and brightness pairing it ships with.

  • SA1.9-Cthis model1.95 mm500×500 mm1,500 nits
  • Absen SA2.6-C2.6 mm500×500 mm1,500 nits

Controllers that drive this panel

All controllers →

Each cabinet carries 65,536 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.

Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open Absen SA1.9-C in the calculator to lay out the real chains and validate them.

Design a wall with this panel

Frequently asked

How much power does the Absen SA1.9-C draw?
Each Absen SA1.9-C cabinet draws up to 110 W at full white and about 37 W with typical content — 440 W/m² max. A 10-cabinet wall therefore needs up to 1,100 W plus headroom.
What is the resolution of the Absen SA1.9-C?
One cabinet is 256 × 256 pixels at a 1.95 mm pixel pitch (262,144 px/m²). About 15 cabinets side by side reach 4K width (≈ 7.50 m).
How heavy is a Absen SA1.9-C wall?
A single cabinet weighs 8.5 kg (34 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 128 kg before mounting structure.
Is the Absen SA1.9-C suitable for outdoor use?
No — the Absen SA1.9-C is an indoor cabinet (IP40 front). Its 1,500 nits suit controlled lighting, not direct sun.

Size a wall with the SA1.9-C

Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.