Skip to content
wikiLED
2.60417 mm pitchIndoorSMD

Unilumin Upad IV 2.6 U-shield specs

Create Value, Continuously • Light weight, easy handling • Low loss • Brilliant Visual Performance • Multiple scenarios, creative display

Pitch
1.5625 mm1.95312 mm2.60417 mm
Size
500×500 mm
Nits
800 nits1,200 nits1,600 nits
Open in calculatorCompareControllersRunning costDatasheet
Unilumin Upad IV 2.6 U-shield LED cabinet

Physical

Pixel pitch
2.60417 mm
Cabinet size (W×H×D)
500 × 500 × 70 mm
Weight
6.3 kg
Weight per m²
25.2 kg/m²
Cabinet type
Rental & staging
Service access
Front & rear

Image

Cabinet resolution
192 × 192 px (1:1)
Pixel density
147,456 px/m²
Brightness (calibrated)
1,600 nits
Refresh rate
7,680 Hz
Contrast
6,000:1
Viewing angle (H/V)
170° / 170°
LED type
SMD
Processing depth
16 bit

Power & thermal

Max power
120 W
Average power
40 W
Max power per m²
480 W/m²
Average power per m²
160 W/m²
Thermal load
409 BTU/h per cabinet

Environment

Rated for
Indoor
IP rating (front)
IP30
IP rating (rear)
IP30
Operating temperature
-10 to 45 °C
LED lifetime
100,000 h
Certifications
TUV-CE, UL, CB, FCC, IC, RoHS

Manufacturer details

Scan rate
1/16
Curve range
-5°~+10° convex, concave optional
Power supply
100~240 VAC, 50~60 Hz
Storage temp
-20~+50C
Site category
Rental
Frame rates hz
50/60
Cabinet variant
U-shield
Pitch published
2.6
Cabinet material
Die-cast Magnesium
Color temperature
2000K~9300K adjustable
Datasheet version
V1.0 2025/07 (unreadable)
Module dimensions
250x250 mm
Operating humidity
10~80%RH
Pixel configuration
3-in-1 U-shield SMD
Brightness published
1600nits (website U-shield table)

All variations in the Upad IV series

All Unilumin cabinets →

Every Unilumin Upad IV series cabinet and the exact pitch, size and brightness pairing it ships with.

Controllers that drive this panel

All controllers →

Each cabinet carries 36,864 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.

Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open Unilumin Upad IV 2.6 U-shield in the calculator to lay out the real chains and validate them.

Design a wall with this panel

Frequently asked

How much power does the Unilumin Upad IV 2.6 U-shield draw?
Each Unilumin Upad IV 2.6 U-shield cabinet draws up to 120 W at full white and about 40 W with typical content — 480 W/m² max. A 10-cabinet wall therefore needs up to 1,200 W plus headroom.
What is the resolution of the Unilumin Upad IV 2.6 U-shield?
One cabinet is 192 × 192 pixels at a 2.60417 mm pixel pitch (147,456 px/m²). About 20 cabinets side by side reach 4K width (≈ 10.00 m).
How heavy is a Unilumin Upad IV 2.6 U-shield wall?
A single cabinet weighs 6.3 kg (25.2 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 95 kg before mounting structure.
Is the Unilumin Upad IV 2.6 U-shield suitable for outdoor use?
No — the Unilumin Upad IV 2.6 U-shield is an indoor cabinet (IP30 front). Its 1,600 nits suit controlled lighting, not direct sun.

Size a wall with the Upad IV 2.6 U-shield

Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.

Open in calculatorCompare with competitors