Unilumin Upad IV 1.5 MIP specs
Create Value, Continuously • Light weight, easy handling • Low loss • Brilliant Visual Performance • Multiple scenarios, creative display
Physical
- Pixel pitch
- 1.5625 mm
- Cabinet size (W×H×D)
- 500 × 500 × 70 mm
- Weight
- 6.3 kg
- Weight per m²
- 25.2 kg/m²
- Cabinet type
- Rental & staging
- Service access
- Front & rear
Image
- Cabinet resolution
- 320 × 320 px (1:1)
- Pixel density
- 409,600 px/m²
- Brightness (calibrated)
- 800 nits
- Refresh rate
- 3,840 Hz
- Contrast
- 8,000:1
- Viewing angle (H/V)
- 160° / 160°
- LED type
- MIP
- Processing depth
- 14 bit
Power & thermal
- Max power
- 80 W
- Average power
- 25 W
- Max power per m²
- 320 W/m²
- Average power per m²
- 100 W/m²
- Thermal load
- 273 BTU/h per cabinet
Environment
- Rated for
- Indoor
- IP rating (front)
- IP30
- IP rating (rear)
- IP30
- Operating temperature
- -10 to 45 °C
- LED lifetime
- 100,000 h
- Certifications
- TUV-CE, UL, CB, FCC, IC, RoHS
Manufacturer details
- Scan rate
- 1/27
- Curve range
- -5°~+10° convex, concave optional
- Power supply
- 100~240 VAC, 50~60 Hz
- Storage temp
- -20~+50C
- Site category
- Rental
- Frame rates hz
- 50/60
- Pitch published
- 1.5
- Cabinet material
- Die-cast Magnesium
- Color temperature
- 2000K~9300K adjustable
- Datasheet version
- V1.1 2024/3
- Module dimensions
- 250x250 mm
- Contrast published
- 8,000:1
- Operating humidity
- 10~80%RH
- Pixel configuration
- MIP
All variations in the Upad IV series
All Unilumin cabinets →Every Unilumin Upad IV series cabinet and the exact pitch, size and brightness pairing it ships with.
- Unilumin Upad IV 1.5 4-in-11.5625 mm500×500 mm800 nits
- Upad IV 1.5 MIPthis model1.5625 mm500×500 mm800 nits
- Unilumin Upad IV 1.91.95312 mm500×500 mm1,200 nits
- Unilumin Upad IV 1.9 U-shield1.95312 mm500×500 mm1,600 nits
- Unilumin Upad IV 2.62.60417 mm500×500 mm1,200 nits
- Unilumin Upad IV 2.6 U-shield2.60417 mm500×500 mm1,600 nits
Controllers that drive this panel
All controllers →Each cabinet carries 102,400 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.
- Colorlight U15 MaxColorlightConfirm ecosystem
2,400cabinets
400 × Mixed520M px total · port-bound
Wire it - NovaStar H20NovaStarConfirm ecosystem
2,400cabinets
400 × Mixed260M px total · port-bound
Wire it - NovaStar MX6000 ProNovaStarConfirm ecosystem
1,376cabinets
64 × Mixed141M px total · capacity-bound
Wire it - NovaStar H15NovaStarConfirm ecosystem
1,200cabinets
200 × Mixed130M px total · port-bound
Wire it - Colorlight U9 MaxColorlightConfirm ecosystem
600cabinets
100 × Mixed260M px total · port-bound
Wire it - Colorlight U6 MaxColorlightConfirm ecosystem
600cabinets
100 × Mixed130M px total · port-bound
Wire it
Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open Unilumin Upad IV 1.5 MIP in the calculator to lay out the real chains and validate them.
Design a wall with this panelFrequently asked
- How much power does the Unilumin Upad IV 1.5 MIP draw?
- Each Unilumin Upad IV 1.5 MIP cabinet draws up to 80 W at full white and about 25 W with typical content — 320 W/m² max. A 10-cabinet wall therefore needs up to 800 W plus headroom.
- What is the resolution of the Unilumin Upad IV 1.5 MIP?
- One cabinet is 320 × 320 pixels at a 1.5625 mm pixel pitch (409,600 px/m²). About 12 cabinets side by side reach 4K width (≈ 6.00 m).
- How heavy is a Unilumin Upad IV 1.5 MIP wall?
- A single cabinet weighs 6.3 kg (25.2 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 95 kg before mounting structure.
- Is the Unilumin Upad IV 1.5 MIP suitable for outdoor use?
- No — the Unilumin Upad IV 1.5 MIP is an indoor cabinet (IP30 front). Its 800 nits suit controlled lighting, not direct sun.
Size a wall with the Upad IV 1.5 MIP
Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.