Unilumin UMini III 1.17 Pro specs
Mini, the New Max P0.9/P1.2
Physical
- Pixel pitch
- 1.17188 mm
- Cabinet size (W×H×D)
- 600 × 338 × 40 mm
- Weight
- 6 kg
- Weight per m²
- 29.6 kg/m²
- Cabinet type
- Fixed install
- Service access
- Front
Image
- Cabinet resolution
- 512 × 288 px (16:9)
- Pixel density
- 728,178 px/m²
- Brightness (calibrated)
- 600 nits
- Refresh rate
- 3,840 Hz
- Contrast
- 15,000:1
- Viewing angle (H/V)
- 180° / 180°
- LED type
- COB
- Processing depth
- 21 bit
Power & thermal
- Max power
- 50 W
- Average power
- 25 W
- Max power per m²
- 247 W/m²
- Average power per m²
- 123 W/m²
- Thermal load
- 171 BTU/h per cabinet
Environment
- Rated for
- Indoor
- IP rating (front)
- IP50
- IP rating (rear)
- IP50
- Operating temperature
- -10 to 45 °C
- LED lifetime
- 100,000 h
- Certifications
- UL, FCC, IC, CE, CB, RoHS2.0, EAC, CCC, CQC, Low Blue Light, Class B
Manufacturer details
- Power supply
- 100~240 V (50&60Hz)
- Storage temp
- -40℃~+60℃
- Site category
- Professional
- Frame rates hz
- 50/60Hz
- Pitch published
- 1.17
- Cabinet material
- Die-cast Aluminum
- Color temperature
- 2,000K-9,500K Adjustable
- Datasheet version
- V1.5 2023/12/31
- Module dimensions
- 300mm×168.75mm
- Operating humidity
- 10~80% RH
- Pixel configuration
- Fully flip chip COB
- Brightness published
- 600cd/m² 1200cd/m²
All variations in the UMini III Pro series
All Unilumin cabinets →Every Unilumin UMini III Pro series cabinet and the exact pitch, size and brightness pairing it ships with.
- Unilumin UMini III 0.9 Pro0.9375 mm600×338 mm600 nits
- UMini III 1.17 Prothis model1.17188 mm600×338 mm600 nits
- Unilumin UMini III 1.2 Pro1.25 mm600×338 mm600 nits
- Unilumin UMini III 1.56 Pro1.5625 mm600×338 mm600 nits
Controllers that drive this panel
All controllers →Each cabinet carries 147,456 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.
- Colorlight U15 MaxColorlightConfirm ecosystem
1,600cabinets
400 × Mixed520M px total · port-bound
Wire it - NovaStar H20NovaStarConfirm ecosystem
1,600cabinets
400 × Mixed260M px total · port-bound
Wire it - NovaStar MX6000 ProNovaStarConfirm ecosystem
956cabinets
64 × Mixed141M px total · capacity-bound
Wire it - NovaStar H15NovaStarConfirm ecosystem
800cabinets
200 × Mixed130M px total · port-bound
Wire it - Colorlight U9 MaxColorlightConfirm ecosystem
400cabinets
100 × Mixed260M px total · port-bound
Wire it - Colorlight U6 MaxColorlightConfirm ecosystem
400cabinets
100 × Mixed130M px total · port-bound
Wire it
Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open Unilumin UMini III 1.17 Pro in the calculator to lay out the real chains and validate them.
Design a wall with this panelFrequently asked
- How much power does the Unilumin UMini III 1.17 Pro draw?
- Each Unilumin UMini III 1.17 Pro cabinet draws up to 50 W at full white and about 25 W with typical content — 247 W/m² max. A 10-cabinet wall therefore needs up to 500 W plus headroom.
- What is the resolution of the Unilumin UMini III 1.17 Pro?
- One cabinet is 512 × 288 pixels at a 1.17188 mm pixel pitch (728,178 px/m²). About 8 cabinets side by side reach 4K width (≈ 4.80 m).
- How heavy is a Unilumin UMini III 1.17 Pro wall?
- A single cabinet weighs 6 kg (29.6 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 90 kg before mounting structure.
- Is the Unilumin UMini III 1.17 Pro suitable for outdoor use?
- No — the Unilumin UMini III 1.17 Pro is an indoor cabinet (IP50 front). Its 600 nits suit controlled lighting, not direct sun.
Size a wall with the UMini III 1.17 Pro
Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.