Unilumin UmateDA3 2.5 specs
Slim & Quick Setup Elevate Your Go-To Commercial Display
Physical
- Pixel pitch
- 2.5 mm
- Cabinet size (W×H×D)
- 640 × 480 × 38 mm
- Weight
- 6 kg
- Weight per m²
- 19.5 kg/m²
- Cabinet type
- Fixed install
- Service access
- Front & rear
Image
- Cabinet resolution
- 256 × 192 px (4:3)
- Pixel density
- 160,000 px/m²
- Brightness (calibrated)
- 600 nits
- Refresh rate
- 4,200 Hz
- Contrast
- 5,000:1
Power & thermal
- Max power
- 114 W
- Average power
- 38 W
- Max power per m²
- 371 W/m²
- Average power per m²
- 124 W/m²
- Thermal load
- 389 BTU/h per cabinet
Environment
- Rated for
- Indoor
- Certifications
- CE, CB, ROHS2.0, FCC, IC, ETL
Manufacturer details
- Site category
- Commercial
- Weight published
- <6 kg/cabinet
- Module dimensions
- 320x240 mm
- Refresh published
- ≥4200Hz
All variations in the UmateDA3 series
All Unilumin cabinets →Every Unilumin UmateDA3 series cabinet and the exact pitch, size and brightness pairing it ships with.
- Unilumin UmateDA3 1.81.8 mm640×480 mm600 nits
- UmateDA3 2.5this model2.5 mm640×480 mm600 nits
Controllers that drive this panel
All controllers →Each cabinet carries 49,152 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.
- Colorlight U15 MaxColorlightConfirm ecosystem
5,200cabinets
400 × Mixed520M px total · port-bound
Wire it - NovaStar H20NovaStarConfirm ecosystem
5,200cabinets
400 × Mixed260M px total · port-bound
Wire it - NovaStar MX6000 ProNovaStarConfirm ecosystem
2,868cabinets
64 × Mixed141M px total · capacity-bound
Wire it - NovaStar H15NovaStarConfirm ecosystem
2,600cabinets
200 × Mixed130M px total · port-bound
Wire it - Colorlight U9 MaxColorlightConfirm ecosystem
1,300cabinets
100 × Mixed260M px total · port-bound
Wire it - Colorlight U6 MaxColorlightConfirm ecosystem
1,300cabinets
100 × Mixed130M px total · port-bound
Wire it
Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open Unilumin UmateDA3 2.5 in the calculator to lay out the real chains and validate them.
Design a wall with this panelFrequently asked
- How much power does the Unilumin UmateDA3 2.5 draw?
- Each Unilumin UmateDA3 2.5 cabinet draws up to 114 W at full white and about 38 W with typical content — 371 W/m² max. A 10-cabinet wall therefore needs up to 1,140 W plus headroom.
- What is the resolution of the Unilumin UmateDA3 2.5?
- One cabinet is 256 × 192 pixels at a 2.5 mm pixel pitch (160,000 px/m²). About 15 cabinets side by side reach 4K width (≈ 9.60 m).
- How heavy is a Unilumin UmateDA3 2.5 wall?
- A single cabinet weighs 6 kg (19.5 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 90 kg before mounting structure.
- Is the Unilumin UmateDA3 2.5 suitable for outdoor use?
- No — the Unilumin UmateDA3 2.5 is an indoor cabinet. Its 600 nits suit controlled lighting, not direct sun.
Size a wall with the UmateDA3 2.5
Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.