Unilumin UDA II 1.2 specs
Fine-pitch indoor commercial display available in P1.2, P1.5, P1.8, P2 and P2.5 with a 4200 Hz high refresh rate. Unilumin positions the series on unprecedented stability, high flexibility and a vivid visual experience.
Physical
- Pixel pitch
- 1.25 mm
- Cabinet size (W×H×D)
- 640 × 480 × 62 mm
- Weight
- 7.8 kg
- Weight per m²
- 25.4 kg/m²
- Cabinet type
- Fixed install
- Service access
- Front
Image
- Cabinet resolution
- 512 × 384 px (4:3)
- Pixel density
- 640,000 px/m²
- Brightness (calibrated)
- 600 nits
- Refresh rate
- 4,200 Hz
- Contrast
- 5,000:1
- Viewing angle (H/V)
- 160° / 140°
- LED type
- SMD
- Processing depth
- 14 bit
Power & thermal
- Max power
- 160 W
- Average power
- 48 W
- Max power per m²
- 521 W/m²
- Average power per m²
- 156 W/m²
- Thermal load
- 546 BTU/h per cabinet
Environment
- Rated for
- Indoor
- IP rating (front)
- IP30
- IP rating (rear)
- IP30
- Operating temperature
- -10 to 45 °C
- LED lifetime
- 100,000 h
Manufacturer details
- Scan rate
- 1/64
- Power supply
- AC200-240V, 47-63Hz
- Storage temp
- -20~+55C / 10~60%RH
- Site category
- Commercial
- Cabinet material
- Die-casting Aluminum
- Color temperature
- 2000K~9300K adjustable
- Module resolution
- 256x128
- Contrast published
- 5000:1
- Operating humidity
- 10%~50%RH
- Pixel configuration
- SMD1010
- Processing published
- 12~14bit
All variations in the UDA II series
All Unilumin cabinets →Every Unilumin UDA II series cabinet and the exact pitch, size and brightness pairing it ships with.
- UDA II 1.2this model1.25 mm640×480 mm600 nits
- Unilumin UDA II 1.51.5385 mm640×480 mm600 nits
- Unilumin UDA II 1.81.8605 mm640×480 mm600 nits
- Unilumin UDA II 22 mm640×480 mm600 nits
- Unilumin UDA II 2.52.5 mm640×480 mm600 nits
Controllers that drive this panel
All controllers →Each cabinet carries 196,608 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.
- Colorlight U15 MaxColorlightConfirm ecosystem
1,200cabinets
400 × Mixed520M px total · port-bound
Wire it - NovaStar H20NovaStarConfirm ecosystem
1,200cabinets
400 × Mixed260M px total · port-bound
Wire it - NovaStar MX6000 ProNovaStarConfirm ecosystem
717cabinets
64 × Mixed141M px total · capacity-bound
Wire it - NovaStar H15NovaStarConfirm ecosystem
600cabinets
200 × Mixed130M px total · port-bound
Wire it - Colorlight U9 MaxColorlightConfirm ecosystem
300cabinets
100 × Mixed260M px total · port-bound
Wire it - Colorlight U6 MaxColorlightConfirm ecosystem
300cabinets
100 × Mixed130M px total · port-bound
Wire it
Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open Unilumin UDA II 1.2 in the calculator to lay out the real chains and validate them.
Design a wall with this panelFrequently asked
- How much power does the Unilumin UDA II 1.2 draw?
- Each Unilumin UDA II 1.2 cabinet draws up to 160 W at full white and about 48 W with typical content — 521 W/m² max. A 10-cabinet wall therefore needs up to 1,600 W plus headroom.
- What is the resolution of the Unilumin UDA II 1.2?
- One cabinet is 512 × 384 pixels at a 1.25 mm pixel pitch (640,000 px/m²). About 8 cabinets side by side reach 4K width (≈ 5.12 m).
- How heavy is a Unilumin UDA II 1.2 wall?
- A single cabinet weighs 7.8 kg (25.4 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 117 kg before mounting structure.
- Is the Unilumin UDA II 1.2 suitable for outdoor use?
- No — the Unilumin UDA II 1.2 is an indoor cabinet (IP30 front). Its 600 nits suit controlled lighting, not direct sun.
Size a wall with the UDA II 1.2
Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.