Samsung MM012F specs
The Wall is a pioneer, constantly opening new ways for unmatched visual statements. Leveraging Samsung's rich R&D heritage, it now offers a more business-focused solution while maintaining its signature picture quality. Introducing The Wall M series—designed to revolutionize the way you do business.
Physical
- Pixel pitch
- 1.25 mm
- Cabinet size (W×H×D)
- 600 × 338 × 50 mm
- Weight
- 5.1 kg
- Weight per m²
- 25.2 kg/m²
- Cabinet type
- Fixed install
- Service access
- Front
Image
- Cabinet resolution
- 480 × 270 px (16:9)
- Pixel density
- 640,000 px/m²
- Brightness (calibrated)
- 600 nits
- Refresh rate
- 3,840 Hz
- Contrast
- 8,000:1
- Viewing angle (H/V)
- 160° / 160°
- LED type
- COB
- Processing depth
- 16 bit
Power & thermal
- Max power
- 93 W
- Average power
- 42 W
- Max power per m²
- 458 W/m²
- Average power per m²
- 205 W/m²
- Thermal load
- 317 BTU/h per cabinet
Environment
- Rated for
- Indoor
- IP rating (front)
- IP40
- IP rating (rear)
- IP20
- Operating temperature
- 0 to 40 °C
- LED lifetime
- 100,000 h
- Certifications
- IEC 62368-1, IEC 60950-1, EMC Class A, TUV Eye Comfort
Manufacturer details
- Usage
- indoor
- Features
- vxt
- Power supply
- 100 to 240
- Frame rates hz
- 50 / 60 (100/120 FRC)
- Weight published
- 5.1 (kg
- Color temperature
- 6,500K ± 500K
- Contrast published
- 8,000:1
- Operating humidity
- 10 ~ 80%
- Samsung model code
- LH012MMFRGS
- Pixel configuration
- Flip-chip RGB LED
- Brightness published
- 600 nit
- Installation options
- flat,concave,inner-l
All variations in the MMF series
All Samsung cabinets →Every Samsung MMF series cabinet and the exact pitch, size and brightness pairing it ships with.
- Samsung MM009F0.93 mm600×338 mm600 nits
- MM012Fthis model1.25 mm600×338 mm600 nits
- Samsung MM015F1.56 mm600×338 mm600 nits
Controllers that drive this panel
All controllers →Each cabinet carries 129,600 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.
- Colorlight U15 MaxColorlightConfirm ecosystem
2,000cabinets
400 × Mixed520M px total · port-bound
Wire it - NovaStar H20NovaStarConfirm ecosystem
2,000cabinets
400 × Mixed260M px total · port-bound
Wire it - NovaStar MX6000 ProNovaStarConfirm ecosystem
1,087cabinets
64 × Mixed141M px total · capacity-bound
Wire it - NovaStar H15NovaStarConfirm ecosystem
1,000cabinets
200 × Mixed130M px total · port-bound
Wire it - Colorlight U9 MaxColorlightConfirm ecosystem
500cabinets
100 × Mixed260M px total · port-bound
Wire it - Colorlight U6 MaxColorlightConfirm ecosystem
500cabinets
100 × Mixed130M px total · port-bound
Wire it
Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open Samsung MM012F in the calculator to lay out the real chains and validate them.
Design a wall with this panelFrequently asked
- How much power does the Samsung MM012F draw?
- Each Samsung MM012F cabinet draws up to 93 W at full white and about 42 W with typical content — 458 W/m² max. A 10-cabinet wall therefore needs up to 928 W plus headroom.
- What is the resolution of the Samsung MM012F?
- One cabinet is 480 × 270 pixels at a 1.25 mm pixel pitch (640,000 px/m²). About 8 cabinets side by side reach 4K width (≈ 4.80 m).
- How heavy is a Samsung MM012F wall?
- A single cabinet weighs 5.1 kg (25.2 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 77 kg before mounting structure.
- Is the Samsung MM012F suitable for outdoor use?
- No — the Samsung MM012F is an indoor cabinet (IP40 front). Its 600 nits suit controlled lighting, not direct sun.
Size a wall with the MM012F
Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.