LG LSAP007 specs
Compatible with the Megapixel VR HELIOS® Controller this Micro LED delivers stunning colors & true black. It offers IP50/IP20 rating, & is LG software compatible.

Physical
- Pixel pitch
- 0.78 mm
- Cabinet size (W×H×D)
- 600 × 338 × 45 mm
- Weight
- 7.8 kg
- Weight per m²
- 38.5 kg/m²
- Cabinet type
- Fixed install
- Service access
- Front
Image
- Cabinet resolution
- 768 × 432 px (16:9)
- Pixel density
- 1,638,400 px/m²
- Brightness (calibrated)
- 600 nits
- Refresh rate
- 3,840 Hz
- Contrast
- 17,000:1
- Viewing angle (H/V)
- 150° / 150°
- LED type
- COB
- Processing depth
- 22 bit
Power & thermal
- Max power
- 70 W
- Average power
- 40 W
- Max power per m²
- 346 W/m²
- Average power per m²
- 198 W/m²
- Thermal load
- 239 BTU/h per cabinet
Environment
- Rated for
- Indoor
- IP rating (front)
- IP50
- IP rating (rear)
- IP20
- Operating temperature
- 0 to 40 °C
- LED lifetime
- 100,000 h
Manufacturer details
- Power supply
- 100 to 240
- Frame rates hz
- 23.98 / 24 / 25 / 29.97 / 30 / 50 / 59.94 / 60
- Short description
- Micro LED Display with Megapixel HELIOS LED Processing Platform
- Operating humidity
- 10 ~ 80%
- Pixel configuration
- Micro LED
All variations in the LSAP series
All LG cabinets →Every LG LSAP series cabinet and the exact pitch, size and brightness pairing it ships with.
- LSAP007this model0.78 mm600×338 mm600 nits
- LG LSAP0090.94 mm600×338 mm800 nits
- LG LSAP0121.25 mm600×338 mm1,000 nits
Controllers that drive this panel
All controllers →Each cabinet carries 331,776 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.
- NovaStar MX6000 ProNovaStarConfirm ecosystem
424cabinets
64 × Mixed141M px total · capacity-bound
Wire it - Colorlight U15 MaxColorlightConfirm ecosystem
400cabinets
400 × Mixed520M px total · port-bound
Wire it - NovaStar H20NovaStarConfirm ecosystem
400cabinets
400 × Mixed260M px total · port-bound
Wire it - NovaStar H15NovaStarConfirm ecosystem
200cabinets
200 × Mixed130M px total · port-bound
Wire it - Brompton Technology Tessera SQ200BromptonConfirm ecosystem
108cabinets
2 × Fibre36M px total · port-bound
Wire it - NovaStar CX80 ProNovaStarConfirm ecosystem
106cabinets
16 × Mixed35.4M px total · capacity-bound
Wire it
Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open LG LSAP007 in the calculator to lay out the real chains and validate them.
Design a wall with this panelFrequently asked
- How much power does the LG LSAP007 draw?
- Each LG LSAP007 cabinet draws up to 70 W at full white and about 40 W with typical content — 346 W/m² max. A 10-cabinet wall therefore needs up to 700 W plus headroom.
- What is the resolution of the LG LSAP007?
- One cabinet is 768 × 432 pixels at a 0.78 mm pixel pitch (1,638,400 px/m²). About 5 cabinets side by side reach 4K width (≈ 3.00 m).
- How heavy is a LG LSAP007 wall?
- A single cabinet weighs 7.8 kg (38.5 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 117 kg before mounting structure.
- Is the LG LSAP007 suitable for outdoor use?
- No — the LG LSAP007 is an indoor cabinet (IP50 front). Its 600 nits suit controlled lighting, not direct sun.
Size a wall with the LSAP007
Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.