How much power does the Absen KLCOB0.7 draw?

Each Absen KLCOB0.7 cabinet draws up to 88 W at full white and about 30 W with typical content — 434 W/m² max. A 10-cabinet wall therefore needs up to 880 W plus headroom.

What is the resolution of the Absen KLCOB0.7?

One cabinet is 768 × 432 pixels at a 0.78 mm pixel pitch (1,635,976 px/m²). About 5 cabinets side by side reach 4K width (≈ 3.00 m).

How heavy is a Absen KLCOB0.7 wall?

A single cabinet weighs 4.5 kg (22.2 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 68 kg before mounting structure.

Is the Absen KLCOB0.7 suitable for outdoor use?

No — the Absen KLCOB0.7 is an indoor cabinet (IP40 front). Its 800 nits suit controlled lighting, not direct sun.

0.78 mm pitchIndoorCOB

Absen KLCOB0.7 specs

The KLCOB series is the professional MicroLED solution by Absen. The product adopts Micro LED technology, which is stable and reliable, and has strong protective performance.

Open in calculator Compare Controllers Running cost

Physical

Pixel pitch: 0.78 mm
Cabinet size (W×H×D): 600 × 338 × 39 mm
Weight: 4.5 kg
Weight per m²: 22.2 kg/m²
Cabinet type: Fixed install
Service access: Front

Image

Cabinet resolution: 768 × 432 px (16:9)
Pixel density: 1,635,976 px/m²
Brightness (calibrated): 800 nits
Refresh rate: 3,840 Hz
Contrast: 15,000:1
Viewing angle (H/V): 160° / 160°
LED type: COB
Processing depth: 14 bit

Power & thermal

Max power: 88 W
Average power: 30 W
Max power per m²: 434 W/m²
Average power per m²: 148 W/m²
Thermal load: 300 BTU/h per cabinet

Environment

Rated for: Indoor
IP rating (front): IP40
IP rating (rear): IP21
Operating temperature: -10 to 40 °C
LED lifetime: 100,000 h
Certifications: CCC, CE, ETL, FCC, UKCA

Manufacturer details

Power supply: 100 to 240
Cabinet material: Die-casting aluminum
Short description: • Capture Every Brilliance • Stay Cool, Enjoy More • Strong Against External Impact • User Friendly
Operating humidity: 10 to 80%
Pixel configuration: Flip Chip COB

Controllers that drive this panel

All controllers →

Each cabinet carries 331,776 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.

NovaStar MX6000 Pro
NovaStarConfirm ecosystem
424cabinets
64 × Mixed
141M px total · capacity-bound
Wire it
Colorlight U15 Max
ColorlightConfirm ecosystem
400cabinets
400 × Mixed
520M px total · port-bound
Wire it
NovaStar H20
NovaStarConfirm ecosystem
400cabinets
400 × Mixed
260M px total · port-bound
Wire it
NovaStar H15
NovaStarConfirm ecosystem
200cabinets
200 × Mixed
130M px total · port-bound
Wire it
Brompton Technology Tessera SQ200
BromptonConfirm ecosystem
108cabinets
2 × Fibre
36M px total · port-bound
Wire it
NovaStar CX80 Pro
NovaStarConfirm ecosystem
106cabinets
16 × Mixed
35.4M px total · capacity-bound
Wire it

Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open Absen KLCOB0.7 in the calculator to lay out the real chains and validate them.

Design a wall with this panel

Frequently asked

How much power does the Absen KLCOB0.7 draw?: Each Absen KLCOB0.7 cabinet draws up to 88 W at full white and about 30 W with typical content — 434 W/m² max. A 10-cabinet wall therefore needs up to 880 W plus headroom.
What is the resolution of the Absen KLCOB0.7?: One cabinet is 768 × 432 pixels at a 0.78 mm pixel pitch (1,635,976 px/m²). About 5 cabinets side by side reach 4K width (≈ 3.00 m).
How heavy is a Absen KLCOB0.7 wall?: A single cabinet weighs 4.5 kg (22.2 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 68 kg before mounting structure.
Is the Absen KLCOB0.7 suitable for outdoor use?: No — the Absen KLCOB0.7 is an indoor cabinet (IP40 front). Its 800 nits suit controlled lighting, not direct sun.

Size a wall with the KLCOB0.7

Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.

Open in calculator Compare with competitors