Skip to content
wikiLED
1.95 mm pitchIndoorSMD

INFiLED IRGX1.9 mk2 mini specs

The GXII Series is a lightweight LED display that features a waterproof and dustproof design, offers creative mounting possibilities, and many more advantages for indoor and outdoor rental applications.

Pitch
1.95 mm2.5 mm2.97 mm3.91 mm4.63 mm4.81 mm5.95 mm6.94 mm
Size
500×1000 mm500×500 mm
Nits
800 nits1,000 nits5,000 nits
Open in calculatorCompareControllersRunning costDatasheet
INFiLED IRGX1.9 mk2 mini LED cabinet

Physical

Pixel pitch
1.95 mm
Cabinet size (W×H×D)
500 × 500 × 75 mm
Weight
8.1 kg
Weight per m²
32.4 kg/m²
Cabinet type
Rental & staging
Service access
Front & rear

Image

Cabinet resolution
256 × 256 px (1:1)
Pixel density
262,144 px/m²
Brightness (calibrated)
800 nits
Refresh rate
3,840 Hz
Contrast
5,000:1
Viewing angle (H/V)
160° / 160°
LED type
SMD
Processing depth
14 bit

Power & thermal

Max power
130 W
Average power
43 W
Max power per m²
520 W/m²
Average power per m²
172 W/m²
Thermal load
444 BTU/h per cabinet

Environment

Rated for
Indoor
IP rating (front)
IP30
IP rating (rear)
IP30
Operating temperature
-10 to 45 °C
LED lifetime
100,000 h
Certifications
CE, CB, FCC, CCC, RoHS

Manufacturer details

Driver ic
ICND2153S
Scan rate
1/32
Brochure url
https://www.infiled.com/wp-content/uploads/2024/01/gxii-series_digital.pdf
Control mode
Synchronous Display
Power supply
100-240V AC, 50/60Hz
Signal input
DVI, HDMI, DP, SDI
Transparency
0%
Site category
Rental Staging
Display colors
4.4T
Frame rates hz
50/60Hz
Led wavelength
R:615-630nm/G:520-535nm/B:465-480nm
Receiving card
Novastar
Pitch published
1,95mm
Power published
130 / 43 W/panel (max / avg)
Cabinet material
Die-casting Aluminum
Control distance
Ethernetcable ≤ 120m or Fiber Optic ≤ 15km
Physical density
262.144 pixels/㎡
Weight published
8,09kg (17,84lb)
Color temperature
6500K (3000K~10000K adjustable）
Module dimensions
500x250mm
Module resolution
256x128pixels
Contrast published
5000:1
Lifetime published
≥100000h
Operating humidity
10-90% RH Non-condensing
Grayscale published
14bit
Pixel configuration
3-in-1 SMD
Brightness published
800nits
Brightness adjustment
0～100% (256 levels)
Service access published
Front / Rear

All variations in the GXmk2 series

All INFiLED cabinets →

Every INFiLED GXmk2 series cabinet and the exact pitch, size and brightness pairing it ships with.

Controllers that drive this panel

All controllers →

Each cabinet carries 65,536 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.

Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open INFiLED IRGX1.9 mk2 mini in the calculator to lay out the real chains and validate them.

Design a wall with this panel

Frequently asked

How much power does the INFiLED IRGX1.9 mk2 mini draw?
Each INFiLED IRGX1.9 mk2 mini cabinet draws up to 130 W at full white and about 43 W with typical content — 520 W/m² max. A 10-cabinet wall therefore needs up to 1,300 W plus headroom.
What is the resolution of the INFiLED IRGX1.9 mk2 mini?
One cabinet is 256 × 256 pixels at a 1.95 mm pixel pitch (262,144 px/m²). About 15 cabinets side by side reach 4K width (≈ 7.50 m).
How heavy is a INFiLED IRGX1.9 mk2 mini wall?
A single cabinet weighs 8.1 kg (32.4 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 121 kg before mounting structure.
Is the INFiLED IRGX1.9 mk2 mini suitable for outdoor use?
No — the INFiLED IRGX1.9 mk2 mini is an indoor cabinet (IP30 front). Its 800 nits suit controlled lighting, not direct sun.

Size a wall with the IRGX1.9 mk2 mini

Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.

Open in calculatorCompare with competitors