Skip to content
wikiLED
1.56 mm pitchIndoorMIP

INFiLED IRGL1.56 SSM specs

Dual-sided indoor LED display engineered for airports, transit hubs and retail — where every direction deserves an equally compelling message.

Pitch
1.56 mm2.5 mm
Size
600×675 mm
Nits
1,500 nits600 nits
Open in calculatorCompareControllersRunning costDatasheet
INFiLED IRGL1.56 SSM LED cabinet

Physical

Pixel pitch
1.56 mm
Cabinet size (W×H×D)
600 × 675 × 26 mm
Weight
7.5 kg
Weight per m²
18.5 kg/m²
Cabinet type
Fixed install
Service access
Front

Image

Cabinet resolution
384 × 432 px (8:9)
Pixel density
409,600 px/m²
Brightness (calibrated)
1,500 nits
Refresh rate
7,680 Hz
Contrast
100,000:1
Viewing angle (H/V)
170° / 170°
LED type
MIP
Processing depth
16 bit

Power & thermal

Max power
300 W
Average power
100 W
Max power per m²
741 W/m²
Average power per m²
247 W/m²
Thermal load
1,024 BTU/h per cabinet

Environment

Rated for
Indoor
IP rating (front)
IP30
IP rating (rear)
IP30
Operating temperature
-10 to 45 °C
LED lifetime
100,000 h
Certifications
CE, FCC, ETL, RoHS

Manufacturer details

Driver ic
PWM Driver Chip
Scan rate
1/36
Brochure url
https://www.infiled.com/wp-content/uploads/2026/07/geminiled-series_brochure-1.pdf
Control mode
Synchronous display
Power supply
100-240V AC 50-60Hz
Signal input
DVI, HDMI, DP, SDI
Transparency
0%
Site category
Fixed Installation
Display colors
281T
Frame rates hz
50/60Hz
Led wavelength
R: 620-625nm, G:533-535nm, B: 470-472nm
Receiving card
NovaStar
Pitch published
1.56mm
Power published
300 / 100 W/panel (max / avg)
Cabinet material
Die-casting Magnesium
Control distance
Ethernet cable≤100m or Fiber Optic≤15km
Physical density
409,600 pixels/m²
Weight published
7.5kg (16.53lb)
Color temperature
6500K(3200K~9300K adjustable)
Module dimensions
300x168.75mm
Module resolution
192x108pixels
Contrast published
100000:1
Lifetime published
≥100,000h
Operating humidity
10-90%RH Non-condensing
Grayscale published
16bit
Pixel configuration
MIP0606
Brightness published
1500nits
Brightness adjustment
0~100%, 256 levels
Service access published
Front

All variations in the GeminiLED series

All INFiLED cabinets →

Every INFiLED GeminiLED series cabinet and the exact pitch, size and brightness pairing it ships with.

  • IRGL1.56 SSMthis model1.56 mm600×675 mm1,500 nits
  • INFiLED IRGL2.52.5 mm600×675 mm600 nits

Controllers that drive this panel

All controllers →

Each cabinet carries 165,888 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.

Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open INFiLED IRGL1.56 SSM in the calculator to lay out the real chains and validate them.

Design a wall with this panel

Frequently asked

How much power does the INFiLED IRGL1.56 SSM draw?
Each INFiLED IRGL1.56 SSM cabinet draws up to 300 W at full white and about 100 W with typical content — 741 W/m² max. A 10-cabinet wall therefore needs up to 3,000 W plus headroom.
What is the resolution of the INFiLED IRGL1.56 SSM?
One cabinet is 384 × 432 pixels at a 1.56 mm pixel pitch (409,600 px/m²). About 10 cabinets side by side reach 4K width (≈ 6.00 m).
How heavy is a INFiLED IRGL1.56 SSM wall?
A single cabinet weighs 7.5 kg (18.5 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 113 kg before mounting structure.
Is the INFiLED IRGL1.56 SSM suitable for outdoor use?
No — the INFiLED IRGL1.56 SSM is an indoor cabinet (IP30 front). Its 1,500 nits suit controlled lighting, not direct sun.

Size a wall with the IRGL1.56 SSM

Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.

Open in calculatorCompare with competitors