Absen KL1.2 II specs
The design for KL II was inspired by erupting effusive rock, with the diamond-shaped surface representing the majestic volcano.
Physical
- Pixel pitch
- 1.25 mm
- Cabinet size (W×H×D)
- 640 × 360 × 65 mm
- Weight
- 6 kg
- Weight per m²
- 26 kg/m²
- Cabinet type
- Fixed install
- Service access
- Front
Image
- Cabinet resolution
- 512 × 288 px (16:9)
- Pixel density
- 640,000 px/m²
- Brightness (calibrated)
- 700 nits
- Refresh rate
- 3,840 Hz
- Contrast
- 4,000:1
- Viewing angle (H/V)
- 140° / 120°
- LED type
- SMD
- Processing depth
- 14 bit
Power & thermal
- Max power
- 116 W
- Average power
- 39 W
- Max power per m²
- 503 W/m²
- Average power per m²
- 169 W/m²
- Thermal load
- 396 BTU/h per cabinet
Environment
- Rated for
- Indoor
- IP rating (front)
- IP40
- IP rating (rear)
- IP21
- Operating temperature
- 10 to 40 °C
- LED lifetime
- 100,000 h
- Certifications
- CCC, CE, ETL, FCC
Manufacturer details
- Power supply
- 100 to 240
- Cabinet material
- Die-casting aluminum
- Short description
- • Superior Image Quality: Offers high brightness, contrast ratio, and color accuracy for vibrant and realistic visuals. • Versatile Applications: Suitable for a wide range of commercial environments, including control rooms, exhibitions, retail, and conference rooms. • Easy Installation and Maintenance: Features a modular design with front-access maintenance for quick and efficient installation and servicing. • Advanced Technology: Incorporates innovative features like floating connectors for cable-free connection and HFR+ mode for smooth playback of high-speed content.
- Operating humidity
- 0 ~ 80%
- Pixel configuration
- Black SMD 3in1 1010
All variations in the KL II series
All Absen cabinets →Every Absen KL II series cabinet and the exact pitch, size and brightness pairing it ships with.
- KL1.2 IIthis model1.25 mm640×360 mm700 nits
- Absen KL1.5 II1.54 mm640×360 mm700 nits
- Absen KL1.8 II1.86 mm640×360 mm700 nits
- Absen KL2.5 II2.5 mm640×360 mm600 nits
Controllers that drive this panel
All controllers →Each cabinet carries 147,456 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.
- Colorlight U15 MaxColorlightConfirm ecosystem
1,600cabinets
400 × Mixed520M px total · port-bound
Wire it - NovaStar H20NovaStarConfirm ecosystem
1,600cabinets
400 × Mixed260M px total · port-bound
Wire it - NovaStar MX6000 ProNovaStarConfirm ecosystem
956cabinets
64 × Mixed141M px total · capacity-bound
Wire it - NovaStar H15NovaStarConfirm ecosystem
800cabinets
200 × Mixed130M px total · port-bound
Wire it - Colorlight U9 MaxColorlightConfirm ecosystem
400cabinets
100 × Mixed260M px total · port-bound
Wire it - Colorlight U6 MaxColorlightConfirm ecosystem
400cabinets
100 × Mixed130M px total · port-bound
Wire it
Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open Absen KL1.2 II in the calculator to lay out the real chains and validate them.
Design a wall with this panelFrequently asked
- How much power does the Absen KL1.2 II draw?
- Each Absen KL1.2 II cabinet draws up to 116 W at full white and about 39 W with typical content — 503 W/m² max. A 10-cabinet wall therefore needs up to 1,160 W plus headroom.
- What is the resolution of the Absen KL1.2 II?
- One cabinet is 512 × 288 pixels at a 1.25 mm pixel pitch (640,000 px/m²). About 8 cabinets side by side reach 4K width (≈ 5.12 m).
- How heavy is a Absen KL1.2 II wall?
- A single cabinet weighs 6 kg (26 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 90 kg before mounting structure.
- Is the Absen KL1.2 II suitable for outdoor use?
- No — the Absen KL1.2 II is an indoor cabinet (IP40 front). Its 700 nits suit controlled lighting, not direct sun.
Size a wall with the KL1.2 II
Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.