Absen JP5 Pro specs
The Jupiter Pro series is specifically designed for the touring stage where every second counts. The expansive panel dimensions are engineered to expedite stage setup.
Physical
- Pixel pitch
- 5.2 mm
- Cabinet size (W×H×D)
- 500 × 500 × 98 mm
- Weight
- 9.5 kg
- Weight per m²
- 38 kg/m²
- Cabinet type
- Rental & staging
- Service access
- Rear
Image
- Cabinet resolution
- 96 × 96 px (1:1)
- Pixel density
- 36,864 px/m²
- Brightness (calibrated)
- 4,500 nits
- Refresh rate
- 7,680 Hz
- Contrast
- 8,500:1
- Viewing angle (H/V)
- 140° / 140°
- LED type
- SMD
- Processing depth
- 16 bit
Power & thermal
- Max power
- 188 W
- Average power
- 63 W
- Max power per m²
- 752 W/m²
- Average power per m²
- 252 W/m²
- Thermal load
- 641 BTU/h per cabinet
Environment
- Rated for
- Outdoor
- IP rating (front)
- IP65
- IP rating (rear)
- IP54
- Operating temperature
- 20 to 50 °C
- LED lifetime
- 100,000 h
- Certifications
- CE, ETL, FCC, RoHS, UKCA
Manufacturer details
- Power supply
- 100 to 240
- Cabinet material
- Carbon fiber+ Die casting aluminum
- Short description
- • Solid touring products • Weighs only 27kg per 1000x1000mm panel • Two sizes are available and can be assembled with each other • 8.9mm pixel pitches • 50% high transparency • Only 20kg per panel • Wind-load resistance High-strength composite structure
- Operating humidity
- 10 ~ 90%
- Pixel configuration
- Black SMD 1921
All variations in the Jupiter Pro series
All Absen cabinets →Every Absen Jupiter Pro series cabinet and the exact pitch, size and brightness pairing it ships with.
- JP5 Prothis model5.2 mm500×500 mm4,500 nits
- Absen JP5 Pro DBL5.2 mm1000×1000 mm4,500 nits
- Absen JP8 Pro DBL8.9 mm1000×1000 mm4,000 nits
Controllers that drive this panel
All controllers →Each cabinet carries 9,216 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.
- Colorlight U15 MaxColorlightConfirm ecosystem
28,000cabinets
400 × Mixed520M px total · port-bound
Wire it - NovaStar H20NovaStarConfirm ecosystem
28,000cabinets
400 × Mixed260M px total · port-bound
Wire it - NovaStar MX6000 ProNovaStarConfirm ecosystem
15,299cabinets
64 × Mixed141M px total · capacity-bound
Wire it - NovaStar H15NovaStarConfirm ecosystem
14,000cabinets
200 × Mixed130M px total · port-bound
Wire it - Colorlight U9 MaxColorlightConfirm ecosystem
7,000cabinets
100 × Mixed260M px total · port-bound
Wire it - Colorlight U6 MaxColorlightConfirm ecosystem
7,000cabinets
100 × Mixed130M px total · port-bound
Wire it
Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open Absen JP5 Pro in the calculator to lay out the real chains and validate them.
Design a wall with this panelFrequently asked
- How much power does the Absen JP5 Pro draw?
- Each Absen JP5 Pro cabinet draws up to 188 W at full white and about 63 W with typical content — 752 W/m² max. A 10-cabinet wall therefore needs up to 1,880 W plus headroom.
- What is the resolution of the Absen JP5 Pro?
- One cabinet is 96 × 96 pixels at a 5.2 mm pixel pitch (36,864 px/m²). About 40 cabinets side by side reach 4K width (≈ 20.00 m).
- How heavy is a Absen JP5 Pro wall?
- A single cabinet weighs 9.5 kg (38 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 143 kg before mounting structure.
- Is the Absen JP5 Pro suitable for outdoor use?
- Yes — it is rated for outdoor use with IP65 front ingress protection and 4,500 nits of calibrated brightness.
Size a wall with the JP5 Pro
Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.