Skip to content
wikiLED
1.5625 mm pitchIndoor

Unilumin UMini P 1.56 specs

Impressive Visual Experience P0.9/P1.2/P1.5/P1.8 Area Light source, comfortable viewing experience for long periods of time 160° wide viewing Angle Less moirés for Shooting

Pitch
Size
600×338 mm600×675 mm
Nits
600 nits500 nits
Unilumin UMini P 1.56 LED cabinet

Physical

Pixel pitch
1.5625 mm
Cabinet size (W×H×D)
600 × 338 × 40 mm
Weight
4 kg
Weight per m²
19.8 kg/m²
Cabinet type
Fixed install
Service access
Front

Image

Cabinet resolution
384 × 216 px (16:9)
Pixel density
409,600 px/m²
Brightness (calibrated)
600 nits
Refresh rate
3,840 Hz
Viewing angle (H/V)
160° / 160°
Processing depth
19 bit

Power & thermal

Max power
70 W
Average power
23 W
Max power per m²
346 W/m²
Average power per m²
114 W/m²
Thermal load
239 BTU/h per cabinet

Environment

Rated for
Indoor

Manufacturer details

Site category
Professional
Cabinet variant
600x337.5
Pitch published
1.56
Power published
Input Power <Max> 70 W/panel
Cabinet material
Die-cast Aluminum

All variations in the UMini P series

All Unilumin cabinets →

Every Unilumin UMini P series cabinet and the exact pitch, size and brightness pairing it ships with.

Controllers that drive this panel

All controllers →

Each cabinet carries 82,944 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.

Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open Unilumin UMini P 1.56 in the calculator to lay out the real chains and validate them.

Design a wall with this panel

Frequently asked

How much power does the Unilumin UMini P 1.56 draw?
Each Unilumin UMini P 1.56 cabinet draws up to 70 W at full white and about 23 W with typical content — 346 W/m² max. A 10-cabinet wall therefore needs up to 700 W plus headroom.
What is the resolution of the Unilumin UMini P 1.56?
One cabinet is 384 × 216 pixels at a 1.5625 mm pixel pitch (409,600 px/m²). About 10 cabinets side by side reach 4K width (≈ 6.00 m).
How heavy is a Unilumin UMini P 1.56 wall?
A single cabinet weighs 4 kg (19.8 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 60 kg before mounting structure.
Is the Unilumin UMini P 1.56 suitable for outdoor use?
No — the Unilumin UMini P 1.56 is an indoor cabinet. Its 600 nits suit controlled lighting, not direct sun.

Size a wall with the UMini P 1.56

Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.