Unilumin ULW III 1.5 Pro MIP specs
First automatic production NPP LED display. Front and rear maintenance, efficient and hassle-free installation and maintenance. 150*337.5mm large module design. Cable-free design with stable and reliable performance.
Physical
- Pixel pitch
- 1.5625 mm
- Cabinet size (W×H×D)
- 600 × 338 × 48 mm
- Weight
- 5 kg
- Weight per m²
- 24.7 kg/m²
- Cabinet type
- Fixed install
- Service access
- Front & rear
Image
- Cabinet resolution
- 384 × 216 px (16:9)
- Pixel density
- 409,600 px/m²
- Brightness (calibrated)
- 600 nits
- Refresh rate
- 3,840 Hz
- Contrast
- 11,000:1
- Viewing angle (H/V)
- 170° / 165°
- LED type
- MIP
- Processing depth
- 16 bit
Power & thermal
- Max power
- 50 W
- Average power
- 17 W
- Max power per m²
- 247 W/m²
- Average power per m²
- 84 W/m²
- Thermal load
- 171 BTU/h per cabinet
Environment
- Rated for
- Indoor
- IP rating (front)
- IP30
- IP rating (rear)
- IP30
- Operating temperature
- -10 to 40 °C
- LED lifetime
- 100,000 h
Manufacturer details
- Power supply
- AC 100~240V
- Storage temp
- -20℃~+60℃
- Site category
- Professional
- Pitch published
- 1.5mm
- Power published
- Max 50-65W, Typical 17-21W
- Datasheet version
- ULWIII MIP Pro brochure (undated)
- Module dimensions
- 150mm×337.5mm
- Module resolution
- 96×216
- Contrast published
- 11,000-13,500:1
- Operating humidity
- 10~80% RH
- Pixel configuration
- MIP
- Brightness published
- 600-800cd/m²
All variations in the ULW III Pro MIP series
All Unilumin cabinets →Every Unilumin ULW III Pro MIP series cabinet and the exact pitch, size and brightness pairing it ships with.
- Unilumin ULW III 0.9 Pro MIP0.9375 mm600×338 mm600 nits
- Unilumin ULW III 1.2 Pro MIP1.25 mm600×338 mm600 nits
- ULW III 1.5 Pro MIPthis model1.5625 mm600×338 mm600 nits
Controllers that drive this panel
All controllers →Each cabinet carries 82,944 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.
- Colorlight U15 MaxColorlightConfirm ecosystem
2,800cabinets
400 × Mixed520M px total · port-bound
Wire it - NovaStar H20NovaStarConfirm ecosystem
2,800cabinets
400 × Mixed260M px total · port-bound
Wire it - NovaStar MX6000 ProNovaStarConfirm ecosystem
1,699cabinets
64 × Mixed141M px total · capacity-bound
Wire it - NovaStar H15NovaStarConfirm ecosystem
1,400cabinets
200 × Mixed130M px total · port-bound
Wire it - Colorlight U9 MaxColorlightConfirm ecosystem
700cabinets
100 × Mixed260M px total · port-bound
Wire it - Colorlight U6 MaxColorlightConfirm ecosystem
700cabinets
100 × Mixed130M px total · port-bound
Wire it
Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open Unilumin ULW III 1.5 Pro MIP in the calculator to lay out the real chains and validate them.
Design a wall with this panelFrequently asked
- How much power does the Unilumin ULW III 1.5 Pro MIP draw?
- Each Unilumin ULW III 1.5 Pro MIP cabinet draws up to 50 W at full white and about 17 W with typical content — 247 W/m² max. A 10-cabinet wall therefore needs up to 500 W plus headroom.
- What is the resolution of the Unilumin ULW III 1.5 Pro MIP?
- One cabinet is 384 × 216 pixels at a 1.5625 mm pixel pitch (409,600 px/m²). About 10 cabinets side by side reach 4K width (≈ 6.00 m).
- How heavy is a Unilumin ULW III 1.5 Pro MIP wall?
- A single cabinet weighs 5 kg (24.7 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 75 kg before mounting structure.
- Is the Unilumin ULW III 1.5 Pro MIP suitable for outdoor use?
- No — the Unilumin ULW III 1.5 Pro MIP is an indoor cabinet (IP30 front). Its 600 nits suit controlled lighting, not direct sun.
Size a wall with the ULW III 1.5 Pro MIP
Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.