Unilumin Udesign SV3.9 Pro 250x1500 specs
Transparent display using AM+ full flip-chip MIP technology, with sensory permeability of ≥95% and peak brightness up to 5000 nits at 560 W per square metre. The leadless flip-chip MIP construction improves reliability by 50% and reduces power consumption by 30%, with modules as thin as 1.8 mm and a 170° wide viewing angle.
Physical
- Pixel pitch
- 3.90625 mm
- Cabinet size (W×H×D)
- 250 × 1,500 × 2 mm
- Weight
- 2.3 kg
- Weight per m²
- 6 kg/m²
- Cabinet type
- Fixed install
Image
- Cabinet resolution
- 64 × 384 px (1:6)
- Pixel density
- 65,536 px/m²
- Brightness (calibrated)
- 5,000 nits
- Refresh rate
- 10,000 Hz
- LED type
- MIP
- Processing depth
- 16 bit
Power & thermal
- Max power
- 210 W
- Average power
- 70 W
- Max power per m²
- 560 W/m²
- Average power per m²
- 187 W/m²
- Thermal load
- 717 BTU/h per cabinet
Environment
- Rated for
- Indoor
Manufacturer details
- Usage
- transparent film
- Transparency
- sensory permeability >=95%
- Site category
- Creative
- Power published
- 560 W/m² max, 187 W/m² minimum
- Weight published
- 6kg/m² (incl. lifting beam), 5kg/m² (incl. power box)
- Module dimensions
- 250x1500 mm
- Module resolution
- 64x384
- Pixel configuration
- AM+ full flip MIP
- Brightness published
- 5000nits (max)
All variations in the Udesign SV Pro series
All Unilumin cabinets →Every Unilumin Udesign SV Pro series cabinet and the exact pitch, size and brightness pairing it ships with.
- Unilumin Udesign SV3.9 Pro 250x12003.90625 mm250×1200 mm5,000 nits
- Udesign SV3.9 Pro 250x1500this model3.90625 mm250×1500 mm5,000 nits
- Unilumin Udesign SV6.25 Pro 250x12006.25 mm250×1200 mm5,000 nits
- Unilumin Udesign SV6.25 Pro 250x15006.25 mm250×1500 mm5,000 nits
Controllers that drive this panel
All controllers →Each cabinet carries 24,576 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.
- Colorlight U15 MaxColorlightConfirm ecosystem
10,400cabinets
400 × Mixed520M px total · port-bound
Wire it - NovaStar H20NovaStarConfirm ecosystem
10,400cabinets
400 × Mixed260M px total · port-bound
Wire it - NovaStar MX6000 ProNovaStarConfirm ecosystem
5,737cabinets
64 × Mixed141M px total · capacity-bound
Wire it - NovaStar H15NovaStarConfirm ecosystem
5,200cabinets
200 × Mixed130M px total · port-bound
Wire it - Colorlight U9 MaxColorlightConfirm ecosystem
2,600cabinets
100 × Mixed260M px total · port-bound
Wire it - Colorlight U6 MaxColorlightConfirm ecosystem
2,600cabinets
100 × Mixed130M px total · port-bound
Wire it
Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open Unilumin Udesign SV3.9 Pro 250x1500 in the calculator to lay out the real chains and validate them.
Design a wall with this panelFrequently asked
- How much power does the Unilumin Udesign SV3.9 Pro 250x1500 draw?
- Each Unilumin Udesign SV3.9 Pro 250x1500 cabinet draws up to 210 W at full white and about 70 W with typical content — 560 W/m² max. A 10-cabinet wall therefore needs up to 2,100 W plus headroom.
- What is the resolution of the Unilumin Udesign SV3.9 Pro 250x1500?
- One cabinet is 64 × 384 pixels at a 3.90625 mm pixel pitch (65,536 px/m²). About 60 cabinets side by side reach 4K width (≈ 15.00 m).
- How heavy is a Unilumin Udesign SV3.9 Pro 250x1500 wall?
- A single cabinet weighs 2.3 kg (6 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 34 kg before mounting structure.
- Is the Unilumin Udesign SV3.9 Pro 250x1500 suitable for outdoor use?
- No — the Unilumin Udesign SV3.9 Pro 250x1500 is an indoor cabinet. Its 5,000 nits suit controlled lighting, not direct sun.
Size a wall with the Udesign SV3.9 Pro 250x1500
Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.