Skip to content
wikiLED
3.75 mm pitchIndoorSMD

AOTO M3.7H specs

Indoor rental and staging LED cabinet with a 3.75 mm pixel pitch, 480 × 960 mm panels and 5,000 nit brightness (SMD).

Pitch
3.75 mm5.85366 mm
Size
480×960 mm
Nits
5,000 nits6,000 nits
AOTO M3.7H LED cabinet

Physical

Pixel pitch
3.75 mm
Cabinet size (W×H×D)
480 × 960 × 92 mm
Weight
11.6 kg
Weight per m²
25.2 kg/m²
Cabinet type
Rental & staging
Service access
Front & rear

Image

Cabinet resolution
128 × 256 px (1:2)
Pixel density
71,111 px/m²
Brightness (calibrated)
5,000 nits
Refresh rate
7,680 Hz
Contrast
5,000:1
Viewing angle (H/V)
160° / 160°
LED type
SMD
Processing depth
20 bit

Power & thermal

Max power
285 W
Average power
97 W
Max power per m²
618 W/m²
Average power per m²
211 W/m²
Thermal load
972 BTU/h per cabinet

Environment

Rated for
Indoor
IP rating (front)
IP30
IP rating (rear)
IP30
Operating temperature
-10 to 40 °C

Manufacturer details

Power supply
AC100-240V 50/60Hz
Site category
Rental Staging
Pitch published
3.75 mm
Cabinet material
aluminium alloy, black
Weight published
11.6±0.5 kg
Module dimensions
240×480 mm
Module resolution
64×128
Operating humidity
10-80% RH
Pixel configuration
SMD 3-in-1, 1R1G1B

All variations in the MXH series

All AOTO cabinets →

Every AOTO MXH series cabinet and the exact pitch, size and brightness pairing it ships with.

  • M3.7Hthis model3.75 mm480×960 mm5,000 nits
  • AOTO M5.8H5.85366 mm480×960 mm6,000 nits

Controllers that drive this panel

All controllers →

Each cabinet carries 32,768 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.

Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open AOTO M3.7H in the calculator to lay out the real chains and validate them.

Design a wall with this panel

Frequently asked

How much power does the AOTO M3.7H draw?
Each AOTO M3.7H cabinet draws up to 285 W at full white and about 97 W with typical content — 618 W/m² max. A 10-cabinet wall therefore needs up to 2,850 W plus headroom.
What is the resolution of the AOTO M3.7H?
One cabinet is 128 × 256 pixels at a 3.75 mm pixel pitch (71,111 px/m²). About 30 cabinets side by side reach 4K width (≈ 14.40 m).
How heavy is a AOTO M3.7H wall?
A single cabinet weighs 11.6 kg (25.2 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 174 kg before mounting structure.
Is the AOTO M3.7H suitable for outdoor use?
No — the AOTO M3.7H is an indoor cabinet (IP30 front). Its 5,000 nits suit controlled lighting, not direct sun.

Size a wall with the M3.7H

Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.