Skip to content
wikiLED
1.5833 mm pitchIndoorCOB

Sharp LD-D151 specs

Next-Level Visual Performance. Built to Endure. Delivering vibrant colour, deep blacks, and extreme contrast, the Sharp D Series redefines the visual experience with captivating content, even in the brightest environments. Powered by advanced flip-chip CoB technology, it provides outstanding image clarity and true blacks, aligning it for presentation of detail-rich content, wayfinding, and immersive digital storytelling across a variety of settings.

Sharp LD-D151 LED cabinet

Physical

Pixel pitch
1.5833 mm
Cabinet size (W×H×D)
608 × 342 × 49 mm
Weight
7 kg
Weight per m²
33.7 kg/m²
Cabinet type
Fixed install
Service access
Front

Image

Cabinet resolution
384 × 216 px (16:9)
Pixel density
398,892 px/m²
Brightness (calibrated)
800 nits
Refresh rate
3,840 Hz
Contrast
20,000:1
Viewing angle (H/V)
160° / 160°
LED type
COB
Processing depth
16 bit

Power & thermal

Max power
65 W
Average power
36 W
Max power per m²
313 W/m²
Average power per m²
173 W/m²
Thermal load
222 BTU/h per cabinet

Environment

Rated for
Indoor
IP rating (front)
IP40
IP rating (rear)
IP20
Operating temperature
-20 to 40 °C
LED lifetime
100,000 h
Certifications
CE, ETL, FCC Class A, RoHS

Manufacturer details

Dimming
256 levels
Features
Single Data Receiving Cards; Single Power Supplies
Warranty
3 years
Scan rate
1/36 dynamic scan
Order code
LDD151
Product group
1.5 mm Indoor FinePitch LED Module
Site category
High-End Indoor
Frame rates hz
50/60
Cabinet material
Aluminum Cabinet
Color temperature
3000-9500 K
Module resolution
96x108
Contrast published
20000:1
Lifetime published
100000 hrs (50% brightness)
Operating humidity
10–80 %
Grayscale published
16 bit
Pixel configuration
COB (0408)
Brightness published
800 cd/m² (max.)
Manufacturer published
SHARP
Refresh rate published
≤ 3840 Hz

All variations in the LD-D series

All Sharp cabinets →

Every Sharp LD-D series cabinet and the exact pitch, size and brightness pairing it ships with.

Controllers that drive this panel

All controllers →

Each cabinet carries 82,944 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.

Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open Sharp LD-D151 in the calculator to lay out the real chains and validate them.

Design a wall with this panel

Frequently asked

How much power does the Sharp LD-D151 draw?
Each Sharp LD-D151 cabinet draws up to 65 W at full white and about 36 W with typical content — 313 W/m² max. A 10-cabinet wall therefore needs up to 651 W plus headroom.
What is the resolution of the Sharp LD-D151?
One cabinet is 384 × 216 pixels at a 1.5833 mm pixel pitch (398,892 px/m²). About 10 cabinets side by side reach 4K width (≈ 6.08 m).
How heavy is a Sharp LD-D151 wall?
A single cabinet weighs 7 kg (33.7 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 105 kg before mounting structure.
Is the Sharp LD-D151 suitable for outdoor use?
No — the Sharp LD-D151 is an indoor cabinet (IP40 front). Its 800 nits suit controlled lighting, not direct sun.

Size a wall with the LD-D151

Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.