ROE Visual BP2V2 specs
ROE Visual is excited to announce the news of over 100,000 panels of the Black Pearl 2 series being utilized in Virtual Production globally.
Physical
- Pixel pitch
- 2.84091 mm
- Cabinet size (W×H×D)
- 500 × 500 × 90 mm
- Weight
- 9.4 kg
- Weight per m²
- 37.4 kg/m²
- Cabinet type
- Production
- Service access
- Front
Image
- Cabinet resolution
- 176 × 176 px (1:1)
- Pixel density
- 123,904 px/m²
- Brightness (calibrated)
- 1,500 nits
- Refresh rate
- 7,680 Hz
- Viewing angle (H/V)
- 140° / 140°
- LED type
- SMD
- Processing depth
- 16 bit
Power & thermal
- Max power
- 190 W
- Average power
- 95 W
- Max power per m²
- 760 W/m²
- Average power per m²
- 380 W/m²
- Thermal load
- 648 BTU/h per cabinet
Environment
- Rated for
- Indoor
- IP rating (front)
- IP40
- IP rating (rear)
- IP40
- Operating temperature
- -20 to 45 °C
- Certifications
- CE, ETL, FCC, WEEE
Manufacturer details
- Usage
- virtual production
- Scan rate
- 1/8
- Curve range
- Concave 10° ~ Convex 0°
- Brochure url
- https://www.roevisual.com/uploads/assets/uploads/bp2v2-brochure-jun.-30-2023-duplicate.pdf
- Storage temp
- -40°C ~ 60°C, 10% ~ 90% RH
- Btu published
- 630 / 300
- Pitch published
- 2.84mm
- Power published
- 190W / 95W
- Weight published
- 9.35kg / 20.61lbs
- Operating humidity
- 10% ~ 90% RH
- Pixel configuration
- SMD 1515 Black
- Brightness published
- 1500nits
- Dimensions published
- 500mm x 500mm x 90mm 19.69” x 19.69” x 3.54”
- Service access published
- Front
Controllers that drive this panel
All controllers →Each cabinet carries 30,976 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.
- Colorlight U15 MaxColorlightConfirm ecosystem
8,000cabinets
400 × Mixed520M px total · port-bound
Wire it - NovaStar H20NovaStarConfirm ecosystem
8,000cabinets
400 × Mixed260M px total · port-bound
Wire it - NovaStar MX6000 ProNovaStarConfirm ecosystem
4,551cabinets
64 × Mixed141M px total · capacity-bound
Wire it - NovaStar H15NovaStarConfirm ecosystem
4,000cabinets
200 × Mixed130M px total · port-bound
Wire it - Colorlight U9 MaxColorlightConfirm ecosystem
2,000cabinets
100 × Mixed260M px total · port-bound
Wire it - Colorlight U6 MaxColorlightConfirm ecosystem
2,000cabinets
100 × Mixed130M px total · port-bound
Wire it
Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open ROE Visual BP2V2 in the calculator to lay out the real chains and validate them.
Design a wall with this panelFrequently asked
- How much power does the ROE Visual BP2V2 draw?
- Each ROE Visual BP2V2 cabinet draws up to 190 W at full white and about 95 W with typical content — 760 W/m² max. A 10-cabinet wall therefore needs up to 1,900 W plus headroom.
- What is the resolution of the ROE Visual BP2V2?
- One cabinet is 176 × 176 pixels at a 2.84091 mm pixel pitch (123,904 px/m²). About 22 cabinets side by side reach 4K width (≈ 11.00 m).
- How heavy is a ROE Visual BP2V2 wall?
- A single cabinet weighs 9.4 kg (37.4 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 140 kg before mounting structure.
- Is the ROE Visual BP2V2 suitable for outdoor use?
- No — the ROE Visual BP2V2 is an indoor cabinet (IP40 front). Its 1,500 nits suit controlled lighting, not direct sun.
Size a wall with the BP2V2
Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.