Absen KLCOB0.9 V2 specs
The KLCOB V2 series is the professional MicroLED solution by Absen. The product adopts Micro LED technology, which is stable and reliable, and has strong protective performance.
Physical
- Pixel pitch
- 0.94 mm
- Cabinet size (W×H×D)
- 600 × 338 × 39 mm
- Weight
- 4.5 kg
- Weight per m²
- 22.2 kg/m²
- Cabinet type
- Fixed install
- Service access
- Front
Image
- Cabinet resolution
- 640 × 360 px (16:9)
- Pixel density
- 1,136,095 px/m²
- Brightness (calibrated)
- 800 nits
- Refresh rate
- 3,840 Hz
- Contrast
- 15,000:1
- Viewing angle (H/V)
- 160° / 160°
- LED type
- COB
- Processing depth
- 19 bit
Power & thermal
- Max power
- 80 W
- Average power
- 27 W
- Max power per m²
- 394 W/m²
- Average power per m²
- 133 W/m²
- Thermal load
- 273 BTU/h per cabinet
Environment
- Rated for
- Indoor
- IP rating (front)
- IP40
- IP rating (rear)
- IP21
- Operating temperature
- 10 to 40 °C
- LED lifetime
- 100,000 h
- Certifications
- CCC, CE, ETL, FCC, UKCA
Manufacturer details
- Power supply
- 100 to 240
- Cabinet material
- Die-casting aluminum
- Short description
- • business display. • Flip chip technology provides high brightness and efficient heat dissipation • The surface is covered with a black coating of polymer material, which brings amazing black consistency • Lightweight design, the max. weight of panel is 4.5kg(9.92lbs), thickness is 39.3mm(1.54") • Easy to clean, a wet towel can be used for usual cleaning Excellent flatness and front maintenance • High reliability, dual backup power and signal ,two power source inputs
- Operating humidity
- 10 ~ 80%
- Pixel configuration
- Flip Chip RGB
All variations in the KLCOB V2 series
All Absen cabinets →Every Absen KLCOB V2 series cabinet and the exact pitch, size and brightness pairing it ships with.
- Absen KLCOB0.7 V20.78 mm600×338 mm800 nits
- KLCOB0.9 V2this model0.94 mm600×338 mm800 nits
- Absen KLCOB1.2 V21.25 mm600×338 mm800 nits
- Absen KLCOB1.5 V21.56 mm600×338 mm800 nits
- Absen KLCOB1.8 V21.88 mm600×338 mm600 nits
Controllers that drive this panel
All controllers →Each cabinet carries 230,400 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.
- Colorlight U15 MaxColorlightConfirm ecosystem
800cabinets
400 × Mixed520M px total · port-bound
Wire it - NovaStar H20NovaStarConfirm ecosystem
800cabinets
400 × Mixed260M px total · port-bound
Wire it - NovaStar MX6000 ProNovaStarConfirm ecosystem
611cabinets
64 × Mixed141M px total · capacity-bound
Wire it - NovaStar H15NovaStarConfirm ecosystem
400cabinets
200 × Mixed130M px total · port-bound
Wire it - Colorlight U9 MaxColorlightConfirm ecosystem
200cabinets
100 × Mixed260M px total · port-bound
Wire it - Colorlight U6 MaxColorlightConfirm ecosystem
200cabinets
100 × Mixed130M px total · port-bound
Wire it
Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open Absen KLCOB0.9 V2 in the calculator to lay out the real chains and validate them.
Design a wall with this panelFrequently asked
- How much power does the Absen KLCOB0.9 V2 draw?
- Each Absen KLCOB0.9 V2 cabinet draws up to 80 W at full white and about 27 W with typical content — 394 W/m² max. A 10-cabinet wall therefore needs up to 800 W plus headroom.
- What is the resolution of the Absen KLCOB0.9 V2?
- One cabinet is 640 × 360 pixels at a 0.94 mm pixel pitch (1,136,095 px/m²). About 6 cabinets side by side reach 4K width (≈ 3.60 m).
- How heavy is a Absen KLCOB0.9 V2 wall?
- A single cabinet weighs 4.5 kg (22.2 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 68 kg before mounting structure.
- Is the Absen KLCOB0.9 V2 suitable for outdoor use?
- No — the Absen KLCOB0.9 V2 is an indoor cabinet (IP40 front). Its 800 nits suit controlled lighting, not direct sun.
Size a wall with the KLCOB0.9 V2
Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.