Skip to content
wikiLED
1.95312 mm pitchIndoorMIP

Unilumin Uslim III MIP 1.9 SO 250x750 specs

Creative Indoor LED Display • Versatile Brightness Options: Ideal for indoor and semi-outdoor use. • Smooth Viewing: 5760Hz~7680Hz refresh rate for an impressive experience. • EBL2.0 surface treatment with higher contrast ratio • Customizable Splicing: Flexible and creative configurations. • Dust-Resistant Surface: Ensures clarity and performance.

Unilumin Uslim III MIP 1.9 SO 250x750 LED cabinet

Physical

Pixel pitch
1.95312 mm
Cabinet size (W×H×D)
250 × 750 × 40 mm
Weight
4.5 kg
Weight per m²
24 kg/m²
Cabinet type
Fixed install
Service access
Front

Image

Cabinet resolution
128 × 384 px (1:3)
Pixel density
262,144 px/m²
Brightness (calibrated)
2,500 nits
Refresh rate
3,840 Hz
Contrast
10,000:1
Viewing angle (H/V)
160° / 160°
LED type
MIP
Processing depth
14 bit

Power & thermal

Max power
86 W
Average power
29 W
Max power per m²
459 W/m²
Average power per m²
155 W/m²
Thermal load
293 BTU/h per cabinet

Environment

Rated for
Indoor
IP rating (front)
IP50
IP rating (rear)
IP30
Operating temperature
-10 to 45 °C
LED lifetime
100,000 h
Certifications
CE, CB, EMC ClassB, CCC, BIS476-1, RoHS2.0

Manufacturer details

Usage
semi-outdoor
Power supply
100~240VAC
Site category
Commercial
Frame rates hz
50&60Hz
Cabinet variant
250x750
Cabinet material
Die-cast Aluminum
Weight published
10.5/5.4/3.5/3.5/4.5/4.5 kg per panel (per size)
Color temperature
2,000K~9,300K adjustable
Module dimensions
250x250 mm
Module resolution
128x128
Operating humidity
10~80%RH
Pixel configuration
MIP

All variations in the Uslim III MIP series

All Unilumin cabinets →

Every Unilumin Uslim III MIP series cabinet and the exact pitch, size and brightness pairing it ships with.

Controllers that drive this panel

All controllers →

Each cabinet carries 49,152 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.

Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open Unilumin Uslim III MIP 1.9 SO 250x750 in the calculator to lay out the real chains and validate them.

Design a wall with this panel

Frequently asked

How much power does the Unilumin Uslim III MIP 1.9 SO 250x750 draw?
Each Unilumin Uslim III MIP 1.9 SO 250x750 cabinet draws up to 86 W at full white and about 29 W with typical content — 459 W/m² max. A 10-cabinet wall therefore needs up to 860 W plus headroom.
What is the resolution of the Unilumin Uslim III MIP 1.9 SO 250x750?
One cabinet is 128 × 384 pixels at a 1.95312 mm pixel pitch (262,144 px/m²). About 30 cabinets side by side reach 4K width (≈ 7.50 m).
How heavy is a Unilumin Uslim III MIP 1.9 SO 250x750 wall?
A single cabinet weighs 4.5 kg (24 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 68 kg before mounting structure.
Is the Unilumin Uslim III MIP 1.9 SO 250x750 suitable for outdoor use?
No — the Unilumin Uslim III MIP 1.9 SO 250x750 is an indoor cabinet (IP50 front). Its 2,500 nits suit controlled lighting, not direct sun.

Size a wall with the Uslim III MIP 1.9 SO 250x750

Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.