Sharp LED-B039i specs
LED B Series - for mission critical interoperability. Designed to limit the interference caused by electromagnetic emissions with compliance to EMC Class B for installations up to 40sqm, Sharp LED B series modules are the first choice for applications demanding unhindered interoperability of multiple systems. Offering almost unlimited creativity in bezel-less digital surfaces, B series yields a powerful image even in the brightest environments making it ideal for any kind of signage scenario.
Physical
- Pixel pitch
- 3.9062 mm
- Cabinet size (W×H×D)
- 500 × 500 × 78 mm
- Weight
- 8.5 kg
- Weight per m²
- 34 kg/m²
- Cabinet type
- Fixed install
- Service access
- Front & rear
Image
- Cabinet resolution
- 128 × 128 px (1:1)
- Pixel density
- 65,536 px/m²
- Brightness (calibrated)
- 1,000 nits
- Refresh rate
- 2,400 Hz
- Contrast
- 3,000:1
- Viewing angle (H/V)
- 160° / 160°
- LED type
- SMD
- Processing depth
- 16 bit
Power & thermal
- Max power
- 100 W
- Average power
- 34 W
- Max power per m²
- 400 W/m²
- Average power per m²
- 136 W/m²
- Thermal load
- 341 BTU/h per cabinet
Environment
- Rated for
- Indoor
- IP rating (front)
- IP30
- IP rating (rear)
- IP30
- Operating temperature
- -10 to 40 °C
- LED lifetime
- 100,000 h
- Certifications
- CCC, CE, ETL, FCC Class A, RoHS
Manufacturer details
- Dimming
- 256 levels
- Features
- Redundant Power Supplies; Single Data Receiving Cards
- Warranty
- 2 years
- Scan rate
- 1/16 dynamic scan
- Order code
- 80000026
- Product group
- 3.9 mm Indoor Square LED Modules
- Site category
- High-End Indoor
- Frame rates hz
- 50/60
- Color temperature
- 3200-9300 K
- Module resolution
- 64x64
- Contrast published
- 3000:1
- Lifetime published
- 100000 hrs (50% brightness)
- Operating humidity
- 10–90 %
- Grayscale published
- 16 bit
- Pixel configuration
- SMD (2121) / 3-in-1 SMD (Black)
- Brightness published
- 1000 cd/m² (max.)
- Manufacturer published
- sQuadrat
- Refresh rate published
- ≤ 2400 Hz
Controllers that drive this panel
All controllers →Each cabinet carries 16,384 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.
- Colorlight U15 MaxColorlightConfirm ecosystem
15,600cabinets
400 × Mixed520M px total · port-bound
Wire it - NovaStar H20NovaStarConfirm ecosystem
15,600cabinets
400 × Mixed260M px total · port-bound
Wire it - NovaStar MX6000 ProNovaStarConfirm ecosystem
8,605cabinets
64 × Mixed141M px total · capacity-bound
Wire it - NovaStar H15NovaStarConfirm ecosystem
7,800cabinets
200 × Mixed130M px total · port-bound
Wire it - Colorlight U9 MaxColorlightConfirm ecosystem
3,900cabinets
100 × Mixed260M px total · port-bound
Wire it - Colorlight U6 MaxColorlightConfirm ecosystem
3,900cabinets
100 × Mixed130M px total · port-bound
Wire it
Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open Sharp LED-B039i in the calculator to lay out the real chains and validate them.
Design a wall with this panelFrequently asked
- How much power does the Sharp LED-B039i draw?
- Each Sharp LED-B039i cabinet draws up to 100 W at full white and about 34 W with typical content — 400 W/m² max. A 10-cabinet wall therefore needs up to 1,000 W plus headroom.
- What is the resolution of the Sharp LED-B039i?
- One cabinet is 128 × 128 pixels at a 3.9062 mm pixel pitch (65,536 px/m²). About 30 cabinets side by side reach 4K width (≈ 15.00 m).
- How heavy is a Sharp LED-B039i wall?
- A single cabinet weighs 8.5 kg (34 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 128 kg before mounting structure.
- Is the Sharp LED-B039i suitable for outdoor use?
- No — the Sharp LED-B039i is an indoor cabinet (IP30 front). Its 1,000 nits suit controlled lighting, not direct sun.
Size a wall with the LED-B039i
Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.