ROE Visual BM2i-Matte specs
ROE Black Marble floor provides an amazing interactive playground for experiencing fun interactive games. People love the feeling of knowing they've triggered action or a visual response based on their touch.
Physical
- Pixel pitch
- 2.82222 mm
- Cabinet size (W×H×D)
- 610 × 610 × 133 mm
- Weight
- 18.6 kg
- Weight per m²
- 50.1 kg/m²
- Cabinet type
- Rental & staging
- Service access
- Front
Image
- Cabinet resolution
- 216 × 216 px (1:1)
- Pixel density
- 125,550 px/m²
- Brightness (calibrated)
- 800 nits
- Refresh rate
- 7,680 Hz
- Viewing angle (H/V)
- 140° / —°
- LED type
- SMD
- Processing depth
- 16 bit
Power & thermal
- Max power
- 310 W
- Average power
- 155 W
- Max power per m²
- 834 W/m²
- Average power per m²
- 417 W/m²
- Thermal load
- 1,058 BTU/h per cabinet
Environment
- Rated for
- Outdoor
- IP rating (front)
- IP65
- IP rating (rear)
- IP65
- Operating temperature
- -20 to 45 °C
- Certifications
- CE, ETL, FCC, WEEE
Manufacturer details
- Usage
- interactive LED floor
- Scan rate
- 1/12
- Brochure url
- https://www.roevisual.com/uploads/assets/uploads/bm5-brochure-brochure-en-aug.-9-2023-duplicate-duplicate-duplicate-duplicate-duplicate.pdf
- Storage temp
- -40°C ~ 60°C, 10% ~ 90% RH
- Btu published
- 1060 / 490
- Pitch published
- 2.82mm
- Power published
- 310W / 155W
- Weight published
- 18.6kg / 41lbs
- Operating humidity
- 10% ~ 90% RH
- Pixel configuration
- SMD 1515 Black
- Brightness published
- 800nits
- Dimensions published
- 609.6mm x 609.6mm x 133mm 24” x 24” x 5.2”
- Service access published
- Front
All variations in the Black Marble Interactive series
All ROE Visual cabinets →Every ROE Visual Black Marble Interactive series cabinet and the exact pitch, size and brightness pairing it ships with.
- BM2i-Mattethis model2.82222 mm610×610 mm800 nits
- ROE Visual BM4i4.7625 mm610×610 mm2,000 nits
Controllers that drive this panel
All controllers →Each cabinet carries 46,656 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.
- Colorlight U15 MaxColorlightConfirm ecosystem
5,200cabinets
400 × Mixed520M px total · port-bound
Wire it - NovaStar H20NovaStarConfirm ecosystem
5,200cabinets
400 × Mixed260M px total · port-bound
Wire it - NovaStar MX6000 ProNovaStarConfirm ecosystem
3,022cabinets
64 × Mixed141M px total · capacity-bound
Wire it - NovaStar H15NovaStarConfirm ecosystem
2,600cabinets
200 × Mixed130M px total · port-bound
Wire it - Colorlight U9 MaxColorlightConfirm ecosystem
1,300cabinets
100 × Mixed260M px total · port-bound
Wire it - Colorlight U6 MaxColorlightConfirm ecosystem
1,300cabinets
100 × Mixed130M px total · port-bound
Wire it
Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open ROE Visual BM2i-Matte in the calculator to lay out the real chains and validate them.
Design a wall with this panelFrequently asked
- How much power does the ROE Visual BM2i-Matte draw?
- Each ROE Visual BM2i-Matte cabinet draws up to 310 W at full white and about 155 W with typical content — 834 W/m² max. A 10-cabinet wall therefore needs up to 3,100 W plus headroom.
- What is the resolution of the ROE Visual BM2i-Matte?
- One cabinet is 216 × 216 pixels at a 2.82222 mm pixel pitch (125,550 px/m²). About 18 cabinets side by side reach 4K width (≈ 10.97 m).
- How heavy is a ROE Visual BM2i-Matte wall?
- A single cabinet weighs 18.6 kg (50.1 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 279 kg before mounting structure.
- Is the ROE Visual BM2i-Matte suitable for outdoor use?
- Yes — it is rated for outdoor use with IP65 front ingress protection and 800 nits of calibrated brightness.
Size a wall with the BM2i-Matte
Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.