Absen LR3.9-7.8 V2 HBR specs
The LR V2 series, a lightweight transparent display, offers 33% transparency and robust water resistance, making it a favorite for concert stages.
Physical
- Pixel pitch
- 3.906 mm
- Cabinet size (W×H×D)
- 500 × 500 × 71 mm
- Weight
- 5 kg
- Weight per m²
- 20 kg/m²
- Cabinet type
- Rental & staging
- Service access
- Rear
Image
- Cabinet resolution
- 128 × 128 px (1:1)
- Pixel density
- 65,536 px/m²
- Brightness (calibrated)
- 4,000 nits
- Refresh rate
- 7,680 Hz
- Contrast
- 4,000:1
- Viewing angle (H/V)
- 160° / 160°
- LED type
- SMD
- Processing depth
- 15 bit
Power & thermal
- Max power
- 88 W
- Average power
- 29 W
- Max power per m²
- 352 W/m²
- Average power per m²
- 116 W/m²
- Thermal load
- 300 BTU/h per cabinet
Environment
- Rated for
- Outdoor
- IP rating (front)
- IP65
- IP rating (rear)
- IP54
- Operating temperature
- 20 to 50 °C
- LED lifetime
- 100,000 h
- Certifications
- BIS, CE, FCC, RoHS, UKCA
Manufacturer details
- Power supply
- 100 to 240
- Cabinet material
- Die-casting aluminum
- Short description
- • 33% high transparency • Each 1000x500mm panel weighs 7.7kg (16.98lbs) • Masks are fixed to the module through screws and clips to ensure the viewing effect under a wide viewing angle • Excellent water-resistant capabilities ensure safe and reliable outdoor use; all modules, power boxes, and cables are water-resistant • The module utilizes a glue potting process to to ensure maximum protection against moisture and reduce the impact of high and low temperature changes, ultimately ensuring stability and reliability for outdoor use • The magnets design on the top and bottom allows one-man installation and strengthens the connection between panels
- Operating humidity
- 10 ~ 90%
- Pixel configuration
- SMD 3in1 1921
Controllers that drive this panel
All controllers →Each cabinet carries 16,384 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.
- Colorlight U15 MaxColorlightConfirm ecosystem
15,600cabinets
400 × Mixed520M px total · port-bound
Wire it - NovaStar H20NovaStarConfirm ecosystem
15,600cabinets
400 × Mixed260M px total · port-bound
Wire it - NovaStar MX6000 ProNovaStarConfirm ecosystem
8,605cabinets
64 × Mixed141M px total · capacity-bound
Wire it - NovaStar H15NovaStarConfirm ecosystem
7,800cabinets
200 × Mixed130M px total · port-bound
Wire it - Colorlight U9 MaxColorlightConfirm ecosystem
3,900cabinets
100 × Mixed260M px total · port-bound
Wire it - Colorlight U6 MaxColorlightConfirm ecosystem
3,900cabinets
100 × Mixed130M px total · port-bound
Wire it
Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open Absen LR3.9-7.8 V2 HBR in the calculator to lay out the real chains and validate them.
Design a wall with this panelFrequently asked
- How much power does the Absen LR3.9-7.8 V2 HBR draw?
- Each Absen LR3.9-7.8 V2 HBR cabinet draws up to 88 W at full white and about 29 W with typical content — 352 W/m² max. A 10-cabinet wall therefore needs up to 880 W plus headroom.
- What is the resolution of the Absen LR3.9-7.8 V2 HBR?
- One cabinet is 128 × 128 pixels at a 3.906 mm pixel pitch (65,536 px/m²). About 30 cabinets side by side reach 4K width (≈ 15.00 m).
- How heavy is a Absen LR3.9-7.8 V2 HBR wall?
- A single cabinet weighs 5 kg (20 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 75 kg before mounting structure.
- Is the Absen LR3.9-7.8 V2 HBR suitable for outdoor use?
- Yes — it is rated for outdoor use with IP65 front ingress protection and 4,000 nits of calibrated brightness.
Size a wall with the LR3.9-7.8 V2 HBR
Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.