Skip to content
wikiLED
1.95 mm pitchIndoorSMD

Absen K1.9 Plus XL specs

Indoor fixed-installation LED cabinet with a 1.95 mm pixel pitch, 500 × 750 mm panels and 700 nit brightness (SMD).

Pitch
Size
500×750 mm500×1000 mm
Nits
700 nits
Absen K1.9 Plus XL LED cabinet

Physical

Pixel pitch
1.95 mm
Cabinet size (W×H×D)
500 × 750 × 63 mm
Weight
8.5 kg
Weight per m²
22.7 kg/m²
Cabinet type
Fixed install
Service access
Front & rear

Image

Cabinet resolution
256 × 384 px (2:3)
Pixel density
262,144 px/m²
Brightness (calibrated)
700 nits
Refresh rate
3,840 Hz
Contrast
2,500:1
Viewing angle (H/V)
160° / 160°
LED type
SMD
Processing depth
14 bit

Power & thermal

Max power
158 W
Average power
53 W
Max power per m²
421 W/m²
Average power per m²
141 W/m²
Thermal load
539 BTU/h per cabinet

Environment

Rated for
Indoor
IP rating (front)
IP40
IP rating (rear)
IP21
Operating temperature
-10 to 40 °C
LED lifetime
100,000 h
Certifications
CE, ETL, FCC, RoHS

Manufacturer details

Power supply
100 to 240
Cabinet material
Die-casting aluminum
Short description
• Lighter/Thinner • High Contrast ratio & Resolution • Both Front & Rear Installation and maintenance • Non-Fan, Mute Design
Operating humidity
10 ~ 90%
Pixel configuration
Black SMD 3in1 1515

All variations in the K Plus series

All Absen cabinets →

Every Absen K Plus series cabinet and the exact pitch, size and brightness pairing it ships with.

Controllers that drive this panel

All controllers →

Each cabinet carries 98,304 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.

Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open Absen K1.9 Plus XL in the calculator to lay out the real chains and validate them.

Design a wall with this panel

Frequently asked

How much power does the Absen K1.9 Plus XL draw?
Each Absen K1.9 Plus XL cabinet draws up to 158 W at full white and about 53 W with typical content — 421 W/m² max. A 10-cabinet wall therefore needs up to 1,580 W plus headroom.
What is the resolution of the Absen K1.9 Plus XL?
One cabinet is 256 × 384 pixels at a 1.95 mm pixel pitch (262,144 px/m²). About 15 cabinets side by side reach 4K width (≈ 7.50 m).
How heavy is a Absen K1.9 Plus XL wall?
A single cabinet weighs 8.5 kg (22.7 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 128 kg before mounting structure.
Is the Absen K1.9 Plus XL suitable for outdoor use?
No — the Absen K1.9 Plus XL is an indoor cabinet (IP40 front). Its 700 nits suit controlled lighting, not direct sun.

Size a wall with the K1.9 Plus XL

Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.