Unilumin Umate SF10 specs
Strong and Stable for Outdoor Display
Physical
- Pixel pitch
- 10 mm
- Cabinet size (W×H×D)
- 960 × 960 × 94 mm
- Weight
- 23 kg
- Weight per m²
- 25 kg/m²
- Cabinet type
- Fixed install
Image
- Cabinet resolution
- 96 × 96 px (1:1)
- Pixel density
- 10,000 px/m²
- Brightness (calibrated)
- 6,000 nits
- Refresh rate
- 3,840 Hz
- Processing depth
- 14 bit
Power & thermal
- Max power
- 654 W
- Average power
- 184 W
- Max power per m²
- 710 W/m²
- Average power per m²
- 200 W/m²
- Thermal load
- 2,231 BTU/h per cabinet
Environment
- Rated for
- Outdoor
- IP rating (front)
- IP65
- IP rating (rear)
- IP65
Manufacturer details
- Site category
- DOOH
- Power published
- Max 600-710 W/m²; Typical 200-240 W/m²
- Weight published
- 23 kg/panel
- Module dimensions
- 480×320 mm
- Brightness published
- 6000-10000 nits
All variations in the Umate SF series
All Unilumin cabinets →Every Unilumin Umate SF series cabinet and the exact pitch, size and brightness pairing it ships with.
- Unilumin Umate SF44.4444 mm960×960 mm5,500 nits
- Unilumin Umate SF66.6667 mm960×960 mm6,000 nits
- Unilumin Umate SF88 mm960×960 mm6,000 nits
- Umate SF10this model10 mm960×960 mm6,000 nits
Controllers that drive this panel
All controllers →Each cabinet carries 9,216 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.
- Colorlight U15 MaxColorlightConfirm ecosystem
28,000cabinets
400 × Mixed520M px total · port-bound
Wire it - NovaStar H20NovaStarConfirm ecosystem
28,000cabinets
400 × Mixed260M px total · port-bound
Wire it - NovaStar MX6000 ProNovaStarConfirm ecosystem
15,299cabinets
64 × Mixed141M px total · capacity-bound
Wire it - NovaStar H15NovaStarConfirm ecosystem
14,000cabinets
200 × Mixed130M px total · port-bound
Wire it - Colorlight U9 MaxColorlightConfirm ecosystem
7,000cabinets
100 × Mixed260M px total · port-bound
Wire it - Colorlight U6 MaxColorlightConfirm ecosystem
7,000cabinets
100 × Mixed130M px total · port-bound
Wire it
Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open Unilumin Umate SF10 in the calculator to lay out the real chains and validate them.
Design a wall with this panelFrequently asked
- How much power does the Unilumin Umate SF10 draw?
- Each Unilumin Umate SF10 cabinet draws up to 654 W at full white and about 184 W with typical content — 710 W/m² max. A 10-cabinet wall therefore needs up to 6,540 W plus headroom.
- What is the resolution of the Unilumin Umate SF10?
- One cabinet is 96 × 96 pixels at a 10 mm pixel pitch (10,000 px/m²). About 40 cabinets side by side reach 4K width (≈ 38.40 m).
- How heavy is a Unilumin Umate SF10 wall?
- A single cabinet weighs 23 kg (25 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 345 kg before mounting structure.
- Is the Unilumin Umate SF10 suitable for outdoor use?
- Yes — it is rated for outdoor use with IP65 front ingress protection and 6,000 nits of calibrated brightness.
Size a wall with the Umate SF10
Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.