Skip to content
wikiLED
3.90625 mm pitchIndoorSMD

Unilumin Udesign SV3.9 250x1025 specs

Creating a new Era of Indoor Commercial Display

Unilumin Udesign SV3.9 250x1025 LED cabinet

Physical

Pixel pitch
3.90625 mm
Cabinet size (W×H×D)
250 × 1,025 × 2 mm
Weight
1.5 kg
Weight per m²
6 kg/m²
Cabinet type
Fixed install
Service access
Front

Image

Cabinet resolution
64 × 256 px (1:4)
Pixel density
63,938 px/m²
Brightness (calibrated)
2,500 nits
Refresh rate
3,840 Hz
LED type
SMD
Processing depth
16 bit

Power & thermal

Max power
222 W
Average power
90 W
Max power per m²
866 W/m²
Average power per m²
351 W/m²
Thermal load
757 BTU/h per cabinet

Environment

Rated for
Indoor
IP rating (front)
IP20
IP rating (rear)
IP20
Operating temperature
-20 to 50 °C

Manufacturer details

Usage
transparent film
Scan rate
Static driving (single pixel single control)
Power supply
AC100~240V 50/60Hz
Storage temp
-20℃~60℃
Transparency
92%
Site category
Creative
Frame rates hz
60~120
Pitch published
3.9-3.9 mm
Weight published
6 kg/m²
Color temperature
3000~10000 K
Datasheet version
V1.1 2025.05.05
Module dimensions
250×1025 mm
Module resolution
64×256
Display dimensions
250×1000 mm
Operating humidity
20%-85% (without condensation)
Pixel configuration
SMD 2121 Integrated LED & IC
Brightness published
≥2500 (Black Lamp) / ≥4500 (White Lamp)
Installation published
LED Side Glued / PCB Side Glued / Hanging Up

All variations in the Udesign SV series

All Unilumin cabinets →

Every Unilumin Udesign SV series cabinet and the exact pitch, size and brightness pairing it ships with.

Controllers that drive this panel

All controllers →

Each cabinet carries 16,384 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.

Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open Unilumin Udesign SV3.9 250x1025 in the calculator to lay out the real chains and validate them.

Design a wall with this panel

Frequently asked

How much power does the Unilumin Udesign SV3.9 250x1025 draw?
Each Unilumin Udesign SV3.9 250x1025 cabinet draws up to 222 W at full white and about 90 W with typical content — 866 W/m² max. A 10-cabinet wall therefore needs up to 2,220 W plus headroom.
What is the resolution of the Unilumin Udesign SV3.9 250x1025?
One cabinet is 64 × 256 pixels at a 3.90625 mm pixel pitch (63,938 px/m²). About 60 cabinets side by side reach 4K width (≈ 15.00 m).
How heavy is a Unilumin Udesign SV3.9 250x1025 wall?
A single cabinet weighs 1.5 kg (6 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 23 kg before mounting structure.
Is the Unilumin Udesign SV3.9 250x1025 suitable for outdoor use?
No — the Unilumin Udesign SV3.9 250x1025 is an indoor cabinet (IP20 front). Its 2,500 nits suit controlled lighting, not direct sun.

Size a wall with the Udesign SV3.9 250x1025

Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.