AOTO AD2.5 specs
AD series is an outdoor fixed installation display which specialized into the digital media marketing application, it is thiner, lighter and more energy-efficient comparing with the traditional Sheet Metal cabinet. It features the quick-lock connection between the cabinets to enhance the effectiveness of installation dramatically and save the time of installation. It applies the sophisticated control system design experience of AOTO, to ensure the accurate effect of color display, result in the real visual experience of advertisement.
Physical
- Pixel pitch
- 2.5 mm
- Cabinet size (W×H×D)
- 960 × 960 × 103 mm
- Weight
- 29 kg
- Weight per m²
- 31.5 kg/m²
- Cabinet type
- Fixed install
- Service access
- Rear
Image
- Cabinet resolution
- 384 × 384 px (1:1)
- Pixel density
- 160,000 px/m²
- Brightness (calibrated)
- 5,000 nits
- Refresh rate
- 3,840 Hz
- Contrast
- 5,000:1
- Viewing angle (H/V)
- 140° / 70°
- LED type
- SMD
- Processing depth
- 16 bit
Power & thermal
- Max power
- 558 W
- Average power
- 153 W
- Max power per m²
- 605 W/m²
- Average power per m²
- 166 W/m²
- Thermal load
- 1,904 BTU/h per cabinet
Environment
- Rated for
- Outdoor
- IP rating (front)
- IP65
- Operating temperature
- -20 to 50 °C
Manufacturer details
- Power supply
- AC100-240V 50/60Hz
- Site category
- Fixed Installation
- Pitch published
- 2.5 mm
- Cabinet material
- aluminium, black
- Weight published
- 29±0.5 kg
- Module dimensions
- 320×160 mm
- Module resolution
- 128×64
- Operating humidity
- 10-90% RH
- Pixel configuration
- SMD 3-in-1, 1R1G1B
Controllers that drive this panel
All controllers →Each cabinet carries 147,456 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.
- Colorlight U15 MaxColorlightConfirm ecosystem
1,600cabinets
400 × Mixed520M px total · port-bound
Wire it - NovaStar H20NovaStarConfirm ecosystem
1,600cabinets
400 × Mixed260M px total · port-bound
Wire it - NovaStar MX6000 ProNovaStarConfirm ecosystem
956cabinets
64 × Mixed141M px total · capacity-bound
Wire it - NovaStar H15NovaStarConfirm ecosystem
800cabinets
200 × Mixed130M px total · port-bound
Wire it - Colorlight U9 MaxColorlightConfirm ecosystem
400cabinets
100 × Mixed260M px total · port-bound
Wire it - Colorlight U6 MaxColorlightConfirm ecosystem
400cabinets
100 × Mixed130M px total · port-bound
Wire it
Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open AOTO AD2.5 in the calculator to lay out the real chains and validate them.
Design a wall with this panelFrequently asked
- How much power does the AOTO AD2.5 draw?
- Each AOTO AD2.5 cabinet draws up to 558 W at full white and about 153 W with typical content — 605 W/m² max. A 10-cabinet wall therefore needs up to 5,580 W plus headroom.
- What is the resolution of the AOTO AD2.5?
- One cabinet is 384 × 384 pixels at a 2.5 mm pixel pitch (160,000 px/m²). About 10 cabinets side by side reach 4K width (≈ 9.60 m).
- How heavy is a AOTO AD2.5 wall?
- A single cabinet weighs 29 kg (31.5 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 435 kg before mounting structure.
- Is the AOTO AD2.5 suitable for outdoor use?
- Yes — it is rated for outdoor use with IP65 front ingress protection and 5,000 nits of calibrated brightness.
Size a wall with the AD2.5
Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.