Absen A2725 V3 specs
The Acclaim V3 Series, for high-end commercial and retail applications, is available in 1.2mm, 1.5mm, 1.9mm, and 2.5mm pixel pitches. It has an aspect ratio of 16:9 for optimal visual effects, ideal for commonly viewed videos.
Physical
- Pixel pitch
- 2.54 mm
- Cabinet size (W×H×D)
- 610 × 343 × 45 mm
- Weight
- 5 kg
- Weight per m²
- 23.9 kg/m²
- Cabinet type
- Fixed install
- Service access
- Front
Image
- Cabinet resolution
- 240 × 135 px (16:9)
- Pixel density
- 154,854 px/m²
- Brightness (calibrated)
- 1,000 nits
- Refresh rate
- 3,840 Hz
- Contrast
- 4,000:1
- Viewing angle (H/V)
- 160° / 160°
- LED type
- SMD
- Processing depth
- 16 bit
Power & thermal
- Max power
- 63 W
- Average power
- 21 W
- Max power per m²
- 301 W/m²
- Average power per m²
- 100 W/m²
- Thermal load
- 215 BTU/h per cabinet
Environment
- Rated for
- Indoor
- IP rating (front)
- IP40
- IP rating (rear)
- IP21
- Operating temperature
- -10 to 40 °C
- LED lifetime
- 100,000 h
- Certifications
- CE, ETL, FCC, RoHS, TUV, CCC
Manufacturer details
- Power supply
- 100 to 240
- Cabinet material
- Die-casting aluminum
- Short description
- • Corporate, mall, chain store, transportation hub, etc • Native 16:9, 27.5". Pixel to pixel 4K/HD resolution • A5C+ calibration technology for better display uniformity • Front maintenance of module, PSU, etc • Support wall-mounting, hanging and stacking installation • Wall-mounting solution enables a thickness of less than 9cm • Support full front maintenance of module, power box and receiving card
- Operating humidity
- 10 to 80%
- Pixel configuration
- Black SMD 3in1 2121
All variations in the Acclaim V3 series
All Absen cabinets →Every Absen Acclaim V3 series cabinet and the exact pitch, size and brightness pairing it ships with.
- Absen A2712 V31.27 mm610×343 mm800 nits
- Absen A2715 V31.58 mm610×343 mm800 nits
- Absen A2719 V31.91 mm610×343 mm1,000 nits
- A2725 V3this model2.54 mm610×343 mm1,000 nits
Controllers that drive this panel
All controllers →Each cabinet carries 32,400 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.
- Colorlight U15 MaxColorlightConfirm ecosystem
8,000cabinets
400 × Mixed520M px total · port-bound
Wire it - NovaStar H20NovaStarConfirm ecosystem
8,000cabinets
400 × Mixed260M px total · port-bound
Wire it - NovaStar MX6000 ProNovaStarConfirm ecosystem
4,351cabinets
64 × Mixed141M px total · capacity-bound
Wire it - NovaStar H15NovaStarConfirm ecosystem
4,000cabinets
200 × Mixed130M px total · port-bound
Wire it - Colorlight U9 MaxColorlightConfirm ecosystem
2,000cabinets
100 × Mixed260M px total · port-bound
Wire it - Colorlight U6 MaxColorlightConfirm ecosystem
2,000cabinets
100 × Mixed130M px total · port-bound
Wire it
Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open Absen A2725 V3 in the calculator to lay out the real chains and validate them.
Design a wall with this panelFrequently asked
- How much power does the Absen A2725 V3 draw?
- Each Absen A2725 V3 cabinet draws up to 63 W at full white and about 21 W with typical content — 301 W/m² max. A 10-cabinet wall therefore needs up to 630 W plus headroom.
- What is the resolution of the Absen A2725 V3?
- One cabinet is 240 × 135 pixels at a 2.54 mm pixel pitch (154,854 px/m²). About 16 cabinets side by side reach 4K width (≈ 9.76 m).
- How heavy is a Absen A2725 V3 wall?
- A single cabinet weighs 5 kg (23.9 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 75 kg before mounting structure.
- Is the Absen A2725 V3 suitable for outdoor use?
- No — the Absen A2725 V3 is an indoor cabinet (IP40 front). Its 1,000 nits suit controlled lighting, not direct sun.
Size a wall with the A2725 V3
Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.