Unilumin F-M3A Standard specs
Outdoor Ultra HD Transparent Screen Solution
Physical
- Pixel pitch
- 3.906 mm
- Cabinet size (W×H×D)
- 1,000 × 500 × 82 mm
- Weight
- 7.5 kg
- Weight per m²
- 15 kg/m²
- Cabinet type
- Fixed install
- Service access
- Front & rear
Image
- Cabinet resolution
- 256 × 64 px (4:1)
- Pixel density
- 32,768 px/m²
- Brightness (calibrated)
- 5,000 nits
- Refresh rate
- 3,840 Hz
- Viewing angle (H/V)
- 120° / 120°
- LED type
- SMD
- Processing depth
- 14 bit
Power & thermal
- Max power
- 330 W
- Average power
- 110 W
- Max power per m²
- 660 W/m²
- Average power per m²
- 220 W/m²
- Thermal load
- 1,126 BTU/h per cabinet
Environment
- Rated for
- Outdoor
- IP rating (front)
- IP65
- IP rating (rear)
- IP65
- LED lifetime
- 100,000 h
Manufacturer details
- Usage
- transparent mesh
- Power supply
- 100-240 V
- Transparency
- 40%
- Site category
- Creative
- Pitch published
- 3.9-7.8mm
- Cabinet material
- Profile Aluminium
- Module dimensions
- 500x125 mm
- Pixel configuration
- 1R1G1B
All variations in the Umesh F-M series
All Unilumin cabinets →Every Unilumin Umesh F-M series cabinet and the exact pitch, size and brightness pairing it ships with.
- F-M3A Standardthis model3.906 mm1000×500 mm5,000 nits
- Unilumin F-M5A Premier5.208 mm1000×1000 mm6,500 nits
- Unilumin F-M5A Standard5.208 mm1000×1000 mm5,000 nits
- Unilumin F-M7A Standard7.812 mm1000×500 mm5,000 nits
- Unilumin F-M10A Basic10.416 mm1000×500 mm5,000 nits
- Unilumin F-M10A Premier10.416 mm1000×500 mm8,000 nits
- Unilumin F-M10A Standard10.416 mm1000×500 mm6,500 nits
Controllers that drive this panel
All controllers →Each cabinet carries 16,384 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.
- Colorlight U15 MaxColorlightConfirm ecosystem
15,600cabinets
400 × Mixed520M px total · port-bound
Wire it - NovaStar H20NovaStarConfirm ecosystem
15,600cabinets
400 × Mixed260M px total · port-bound
Wire it - NovaStar MX6000 ProNovaStarConfirm ecosystem
8,605cabinets
64 × Mixed141M px total · capacity-bound
Wire it - NovaStar H15NovaStarConfirm ecosystem
7,800cabinets
200 × Mixed130M px total · port-bound
Wire it - Colorlight U9 MaxColorlightConfirm ecosystem
3,900cabinets
100 × Mixed260M px total · port-bound
Wire it - Colorlight U6 MaxColorlightConfirm ecosystem
3,900cabinets
100 × Mixed130M px total · port-bound
Wire it
Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open Unilumin F-M3A Standard in the calculator to lay out the real chains and validate them.
Design a wall with this panelFrequently asked
- How much power does the Unilumin F-M3A Standard draw?
- Each Unilumin F-M3A Standard cabinet draws up to 330 W at full white and about 110 W with typical content — 660 W/m² max. A 10-cabinet wall therefore needs up to 3,300 W plus headroom.
- What is the resolution of the Unilumin F-M3A Standard?
- One cabinet is 256 × 64 pixels at a 3.906 mm pixel pitch (32,768 px/m²). About 15 cabinets side by side reach 4K width (≈ 15.00 m).
- How heavy is a Unilumin F-M3A Standard wall?
- A single cabinet weighs 7.5 kg (15 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 113 kg before mounting structure.
- Is the Unilumin F-M3A Standard suitable for outdoor use?
- Yes — it is rated for outdoor use with IP65 front ingress protection and 5,000 nits of calibrated brightness.
Size a wall with the F-M3A Standard
Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.