Skip to content
wikiLED
2.604 mm pitchIndoor

Unilumin XS2.6 specs

The XS series display is a series specially designed for creative stage display. Its flexible and soft body is designed for customers' imaginative creative display.

Pitch
Size
500×500 mm
Nits
800 nits
Unilumin XS2.6 LED cabinet

Physical

Pixel pitch
2.604 mm
Cabinet size (W×H×D)
500 × 500 × 83 mm
Weight
7.7 kg
Weight per m²
30.8 kg/m²
Cabinet type
Rental & staging
Service access
Rear

Image

Cabinet resolution
192 × 192 px (1:1)
Pixel density
147,456 px/m²
Brightness (calibrated)
800 nits
Refresh rate
3,840 Hz
Contrast
3,000:1
Viewing angle (H/V)
140° / 120°

Power & thermal

Max power
150 W
Average power
45 W
Max power per m²
600 W/m²
Average power per m²
180 W/m²
Thermal load
512 BTU/h per cabinet

Environment

Rated for
Indoor
IP rating (front)
IP30
IP rating (rear)
IP30
Operating temperature
-20 to 50 °C

Manufacturer details

Curve range
±40°
Power supply
100-240 V
Site category
Rental
Pitch published
2.6
Cabinet material
Die-cast aluminum
Color temperature
2000K~9300K
Module dimensions
500x125 mm
Operating humidity
10-80%
Brightness published
800-1200 cd/m²

All variations in the XS series

All Unilumin cabinets →

Every Unilumin XS series cabinet and the exact pitch, size and brightness pairing it ships with.

Controllers that drive this panel

All controllers →

Each cabinet carries 36,864 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.

Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open Unilumin XS2.6 in the calculator to lay out the real chains and validate them.

Design a wall with this panel

Frequently asked

How much power does the Unilumin XS2.6 draw?
Each Unilumin XS2.6 cabinet draws up to 150 W at full white and about 45 W with typical content — 600 W/m² max. A 10-cabinet wall therefore needs up to 1,500 W plus headroom.
What is the resolution of the Unilumin XS2.6?
One cabinet is 192 × 192 pixels at a 2.604 mm pixel pitch (147,456 px/m²). About 20 cabinets side by side reach 4K width (≈ 10.00 m).
How heavy is a Unilumin XS2.6 wall?
A single cabinet weighs 7.7 kg (30.8 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 116 kg before mounting structure.
Is the Unilumin XS2.6 suitable for outdoor use?
No — the Unilumin XS2.6 is an indoor cabinet (IP30 front). Its 800 nits suit controlled lighting, not direct sun.

Size a wall with the XS2.6

Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.