Unilumin XF2.6 specs
Purpose-designed Floor Display P1.9/2.6/02/03 Shining Star of Stage Perfect Fusion of xR Stage Enjoyable Operation Experience
Physical
- Pixel pitch
- 2.604 mm
- Cabinet size (W×H×D)
- 500 × 500 × 77 mm
- Weight
- 9 kg
- Weight per m²
- 36 kg/m²
- Cabinet type
- Rental & staging
- Service access
- Front
Image
- Cabinet resolution
- 192 × 192 px (1:1)
- Pixel density
- 147,456 px/m²
- Brightness (calibrated)
- 800 nits
- Refresh rate
- 7,680 Hz
- Contrast
- 6,000:1
- Viewing angle (H/V)
- 140° / 140°
- LED type
- SMD
- Processing depth
- 14 bit
Power & thermal
- Max power
- 120 W
- Average power
- 40 W
- Max power per m²
- 480 W/m²
- Average power per m²
- 160 W/m²
- Thermal load
- 409 BTU/h per cabinet
Environment
- Rated for
- Indoor
- IP rating (front)
- IP40
- IP rating (rear)
- IP40
- Operating temperature
- -10 to 45 °C
- LED lifetime
- 100,000 h
Manufacturer details
- Usage
- LED floor / virtual set
- Power supply
- 100-240 V
- Site category
- Rental
- Pitch published
- 2.6
- Color temperature
- 2000K~9300K
- Module dimensions
- 250x250 mm
- Pixel configuration
- Black SMD 3in1 1515
All variations in the XF series
All Unilumin cabinets →Every Unilumin XF series cabinet and the exact pitch, size and brightness pairing it ships with.
- Unilumin XF1.91.953 mm500×500 mm800 nits
- XF2.6this model2.604 mm500×500 mm800 nits
- Unilumin XF022.976 mm500×500 mm1,200 nits
- Unilumin XF033.906 mm500×500 mm1,200 nits
Controllers that drive this panel
All controllers →Each cabinet carries 36,864 px, so a controller's port budget and total capacity decide how much wall it drives. Its receiving card is not published — confirm the control ecosystem with your supplier before ordering.
- Colorlight U15 MaxColorlightConfirm ecosystem
6,800cabinets
400 × Mixed520M px total · port-bound
Wire it - NovaStar H20NovaStarConfirm ecosystem
6,800cabinets
400 × Mixed260M px total · port-bound
Wire it - NovaStar MX6000 ProNovaStarConfirm ecosystem
3,824cabinets
64 × Mixed141M px total · capacity-bound
Wire it - NovaStar H15NovaStarConfirm ecosystem
3,400cabinets
200 × Mixed130M px total · port-bound
Wire it - Colorlight U9 MaxColorlightConfirm ecosystem
1,700cabinets
100 × Mixed260M px total · port-bound
Wire it - Colorlight U6 MaxColorlightConfirm ecosystem
1,700cabinets
100 × Mixed130M px total · port-bound
Wire it
Counts assume one cabinet per port-chain hop at 60 Hz / 8-bit. Open Unilumin XF2.6 in the calculator to lay out the real chains and validate them.
Design a wall with this panelFrequently asked
- How much power does the Unilumin XF2.6 draw?
- Each Unilumin XF2.6 cabinet draws up to 120 W at full white and about 40 W with typical content — 480 W/m² max. A 10-cabinet wall therefore needs up to 1,200 W plus headroom.
- What is the resolution of the Unilumin XF2.6?
- One cabinet is 192 × 192 pixels at a 2.604 mm pixel pitch (147,456 px/m²). About 20 cabinets side by side reach 4K width (≈ 10.00 m).
- How heavy is a Unilumin XF2.6 wall?
- A single cabinet weighs 9 kg (36 kg/m²). A 5 × 3 wall of 15 cabinets weighs about 135 kg before mounting structure.
- Is the Unilumin XF2.6 suitable for outdoor use?
- No — the Unilumin XF2.6 is an indoor cabinet (IP40 front). Its 800 nits suit controlled lighting, not direct sun.
Size a wall with the XF2.6
Dimensions, resolution, power, weight and a validated wiring diagram — free, no account needed.